SUBPART C—Emission Regulations for 1994 and Later Model Year Gasoline-Fueled New Light-Duty Vehicles, New Light-Duty Trucks and New Medium-Duty Passenger Vehicles; Cold Temperature Test Procedu
- 86.201-94—General applicability.
- 86.201-11—General applicability.
- 86.202-94—Definitions.
- 86.203-94—Abbreviations.
- 86.204-94—Section numbering; construction.
- 86.205-11—Introduction; structure of this subpart.
- 86.205-94—Introduction; structure of this subpart.
- 86.206-11—Equipment required; overview.
- 86.206-94—Equipment required; overview.
- 86.208-94—Dynamometer.
- 86.209-94—Exhaust gas sampling system; gasoline-fueled vehicles.
- 86.210-08—Exhaust gas sampling system; Diesel-cycle vehicles not requiring particulate emissions measurements.
- 86.211-94—Exhaust gas analytical system.
- 86.213-04—Fuel specifications.
- 86.213-11—Fuel specifications.
- 86.213-94—Fuel specifications.
- 86.214-94—Analytical gases.
- 86.215-94—EPA urban dynamometer driving schedule.
- 86.216-94—Calibrations, frequency and overview.
- 86.218-94—Dynamometer calibration.
- 86.219-94—CVS calibration.
- 86.221-94—Hydrocarbon analyzer calibration.
- 86.222-94—Carbon monoxide analyzer calibration.
- 86.223-94—Oxides of nitrogen analyzer calibration.
- 86.224-94—Carbon dioxide analyzer calibration.
- 86.226-94—Calibration of other equipment.
- 86.227-94—Test procedures; overview.
- 86.228-94—Transmissions.
- 86.229-94—Road load force, test weight, and inertia weight class determination.
- 86.230-11—Test sequence: general requirements.
- 86.230-94—Test sequence: general requirements.
- 86.231-94—Vehicle preparation.
- 86.232-94—Vehicle preconditioning.
- 86.235-94—Dynamometer procedure.
- 86.236-94—Engine starting and restarting.
- 86.237-08—Dynamometer test run, gaseous emissions.
- 86.237-94—Dynamometer test run, gaseous emissions.
- 86.240-94—Exhaust sample analysis.
- 86.242-94—Records required.
- 86.244-94—Calculations; exhaust emissions.
- 86.246-94—Intermediate temperature testing.