CFR > Title 7 - Agriculture > SUBTITLE B—Regulations of the Department of Agriculture > CHAPTER I—AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (parts 27 to 206) > SUBCHAPTER C—REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 (parts 51 to 75) > PART 51—FRESH FRUITS, VEGETABLES AND OTHER PRODUCTS 1,2 (INSPECTION, CERTIFICATION, AND STANDARDS) > SUBPART —United States Standards for Grades of Table Grapes (European or Vinifera Type) 1 (§51.880 to §51.914) > 51.886—Tolerances.

51.886—Tolerances.

(a) No tolerances are provided in these standards for grapes which fail to meet the applicable maturity requirements other than the allowances specified in § 51.888 or in the sampling and testing procedures of State maturity regulations.
(b) In order to allow for variations incident to proper grading and handling in each of the foregoing grades except U.S. No. 1 Institutional, tolerances, by weight, other than for maturity, are provided as set forth in Tables I and II.
Table I—Tolerances at Shipping Point 1
[Percent]
Factor U.S. Extra fancy table U.S. Fancy table U.S. No. 1 table
(A) For bunches failing to meet color requirements 10 10 10
(B) For bunches failing to meet requirements for minimum diameter of berries 10 10 10
(C) For bunches failing to meet stem color requirements 10
(D) For offsize bunches and for bunches and berries failing to meet the remaining requirements for the grade 8 8 8
Including in (D):
(a) For serious damage 2 2 2
And, including in (a):
Code of Federal Regulations 388
(i) For decay 1/2 of 1 1/2 of 1 1/2 of 1
1 Shipping Point, as used in these standards, means the point of origin of the shipment in the producing area or at port of loading for ship stores or overseas shipment, or, in the case of shipments from outside the continental United States, the port of entry into the United States.
Table II—Tolerances En Route or at Destination
(A) For bunches failing to meet color requirements 10 10 10
(B) For bunches failing to meet requirements for minimum diameter of berries 10 10 10
(C) For bunches failing to meet stem color requirements 10
(D) For offsize bunches and for bunches and berries failing to meet the remaining requirements for the grade 12 12 12
Including in (D):
(a) For permanent defects 8 8 8
(b) For serious damage 4 4 4
And, including in (b):
(i) For serious damage by permanent defects 2 2 2
(ii) For decay 1 1 1
(c) In order to allow for variations incident to proper grading and handling in the U.S. No. 1 Institutional grade only, tolerances, by weight, other than for maturity, are provided as set forth in Tables Ia and IIa of this section.
Table Ia—Tolerances at Shipping Point for U.S. No. 1 Institutional Grade Only 1
[Percent]
Factor U.S. No. 1 institutional
(A) For clusters/bunches failing to meet color requirements 10.
(B) For clusters/bunches failing to meet requirements for minimum diameter of berries 10.
(C) For offsize clusters/bunches 4.
(D) For clusters/bunches and berries failing to meet the remaining requirements for the grade 8.
Including in (D):
(a) For serious damage 2
And, including in (a):
(i) For decay 1/2 of 1.
1Shipping point, as used in these standards, means the point of origin of the shipment in the producing area or at port of loading for ship stores or overseas shipment, or, in the case of shipments from outside the continental United States, the port of entry into the United States.
Table IIa—Tolerances En Route or at Destination for U.S. No. 1 Institutional Grade Only
Factor U.S. No. 1 institutional
(A) For clusters/bunches failing to meet color requirements 10.
(B) For clusters/bunches failing to meet requirements for minimum diameter of berries 10.
(C) For offsize clusters/bunches 4.
(D) For clusters/bunches and berries failing to meet the remaining requirements for the grade 12.
Including in (D):
(a) For permanent defects 8.
(b) For serious damage 4.
And, including in (b):
(i) For serious damage by permanent defects 2.
(ii) For decay 1.

Code of Federal Regulations

[36 FR 9126, May 20, 1971. Redesignated at 42 FR 32514, June 27, 1977, and further redesignated at 46 FR 63203, Dec. 31, 1981, and amended at 52 FR 22437, June 12, 1987. Redesignated and amended at 56 FR 15802, Apr. 18, 1991; 61 FR 11127, Mar. 19, 1996]