SUBPART J—Specifications for Containers for Motor Vehicle Transportation (§178.318 to §178.348-5)
- 178.318—Specification MC 201; container for detonators and percussion caps.
- 178.318-1—Scope.
- 178.318-2—Container.
- 178.318-3—Marking.
- 178.320—General requirements applicable to all DOT specification cargo tank motor vehicles.
- 178.337—Specification MC 331; cargo tank motor vehicle primarily for transportation of compressed gases as defined in subpart G of part 173 of this subchapter.
- 178.337-1—General requirements.
- 178.337-2—Material.
- 178.337-3—Structural integrity.
- 178.337-4—Joints.
- 178.337-5—Bulkheads, baffles and ring stiffeners.
- 178.337-6—Closure for manhole.
- 178.337-7—Overturn protection.
- 178.337-8—Openings, inlets, and outlets.
- 178.337-9—Pressure relief devices, piping, valves, hoses, and fittings.
- 178.337-10—Accident damage protection.
- 178.337-11—Emergency discharge control.
- 178.337-13—Supporting and anchoring.
- 178.337-14—Gauging devices.
- 178.337-15—Pumps and compressors.
- 178.337-16—Testing.
- 178.337-17—Marking.
- 178.337-18—Certification.
- 178.338—Specification MC-338; insulated cargo tank motor vehicle.
- 178.338-1—General requirements.
- 178.338-2—Material.
- 178.338-3—Structural integrity.
- 178.338-4—Joints.
- 178.338-5—Stiffening rings.
- 178.338-6—Manholes.
- 178.338-7—Openings.
- 178.338-8—Pressure relief devices, piping, valves, and fittings.
- 178.338-9—Holding time.
- 178.338-10—Accident damage protection.
- 178.338-11—Discharge control devices.
- 178.338-12—Shear section.
- 178.338-13—Supporting and anchoring.
- 178.338-14—Gauging devices.
- 178.338-15—Cleanliness.
- 178.338-16—Inspection and testing.
- 178.338-17—Pumps and compressors.
- 178.338-18—Marking.
- 178.338-19—Certification.
- 178.345—General design and construction requirements applicable to Specification DOT 406 (§ 178.346), DOT 407 (§ 178.347), and DOT 412 (§ 178.348) cargo tank motor vehicles.
- 178.345-1—General requirements.
- 178.345-2—Material and material thickness.
- 178.345-3—Structural integrity.
- 178.345-4—Joints.
- 178.345-5—Manhole assemblies.
- 178.345-6—Supports and anchoring.
- 178.345-7—Circumferential reinforcements.
- 178.345-8—Accident damage protection.
- 178.345-9—Pumps, piping, hoses and connections.
- 178.345-10—Pressure relief.
- 178.345-11—Tank outlets.
- 178.345-12—Gauging devices.
- 178.345-13—Pressure and leakage tests.
- 178.345-14—Marking.
- 178.345-15—Certification.
- 178.346—Specification DOT 406; cargo tank motor vehicle.
- 178.346-1—General requirements.
- 178.346-2—Material and thickness of material.
- 178.346-3—Pressure relief.
- 178.346-4—Outlets.
- 178.346-5—Pressure and leakage tests.
- 178.347—Specification DOT 407; cargo tank motor vehicle.
- 178.347-1—General requirements.
- 178.347-2—Material and thickness of material.
- 178.347-3—Manhole assemblies.
- 178.347-4—Pressure relief.
- 178.347-5—Pressure and leakage test.
- 178.348—Specification DOT 412; cargo tank motor vehicle.
- 178.348-1—General requirements.
- 178.348-2—Material and thickness of material.
- 178.348-3—Pumps, piping, hoses and connections.
- 178.348-4—Pressure relief.
- 178.348-5—Pressure and leakage test.