19.746—Authorized materials.

(a) General. The appropriate TTB officer determines what materials make spirits unfit for beverage use but do not impair the quality of the spirits for fuel use. Spirits treated with materials authorized under this section will be considered rendered unfit for beverage use and eligible for withdrawal as fuel alcohol.
(b) Authorized materials. Subject to the specifications in paragraph (c) of this section, proprietors are authorized to render spirits unfit for beverage use by adding to each 100 gallons of spirits any of following materials in the quantities specified:
(1) Two gallons or more of—
(i) Gasoline or automotive gasoline (for use in engines that require unleaded gasoline, the Environmental Protection Agency and manufacturers specifications may require that unleaded gasoline be used to render spirits unfit for beverage use);
(ii) Natural gasoline;
(iii) Kerosene;
(iv) Deodorized kerosene;
(v) Rubber hydrocarbon solvent;
(vi) Methyl isobutyl ketone;
(vii) Mixed isomers of nitropropane;
(viii) Heptane;
(ix) Ethyl tertiary butyl ether (ETBE);
(x) Raffinate;
(xi) Naphtha; or
(xii) Any combination of the materials listed in (b)(1)(i) through (xi) of this section; or
(2) Five gallons or more of Toluene; or
(3) One-eighth ( 1/8) of an ounce of denatonium benzoate N.F. and 2 gallons of isopropyl alcohol.
(c) Specifications. (1) Specifications for gasoline, unleaded gasoline, kerosene, deodorized kerosene, rubber hydrocarbon solvent, methyl isobutyl ketone, mixed isomers of nitropropane, heptane, toluene, and isopropyl alcohol are found in part 21, subpart E, of this chapter.
(2) Natural gasoline must meet the following specifications—
(i) Natural gasoline (drip gas) is a mixture of butane, pentane, and hexane hydrocarbons extracted from natural gas; and
(ii) Distillation range: No more than 10 percent of the sample may distill below 97 degrees Fahrenheit; at least 50 percent shall distill at or below 156 degrees Fahrenheit; and at least 90 percent shall distill at or below 209 degrees Fahrenheit.
(3) Raffinate must meet the following specifications—
(i) Octane (R M/2): 66-70;
(ii) Distillation, in degrees Fahrenheit: 10 percent: 120-150 °F; 50 percent: 144-180 °F; 90 percent: 168-200 °F; end point: 216-285 °F;
(iii) API Gravity: 76-82; and
(iv) Reid Vapor Pressure: 5-11.
(4) Naphtha must meet the following specifications—
(i) API Gravity @ 60/60 degrees Fahrenheit: 64-70 °F;
(ii) Lb/Gal: 5.845-6.025;
(iii) Density: 0.7022-0.7238;
(iv) Reid Vapor Pressure: 8 P.S.I.A. Max.;
(v) Distillation in degrees Fahrenheit: I.B.P.: 85 °F Max.; 10 percent: 130 °F Max.; 50 percent: 250 °F Max.; 90 percent: 340 °F Max.; end point: 380 °F;
(vi) Copper Corrosion: 1; and
(vii) Sabolt Color: 28 Min.
(d) Published list. The appropriate TTB officer periodically publishes a list of materials that may be used to make spirits unfit for beverage use in addition to those listed in paragraph (b) of this section. The list can be found at http://www.ttb.treas.gov. The list will specify the material name and quantity required to render spirits unfit for beverage use.

Code of Federal Regulations

( 26 U.S.C. 5181 )