Section 259.482b - Width of primary surface; length of primary surface; elevation.
TALL STRUCTURE ACT (EXCERPT)
Act 259 of 1959
259.482b Width of primary surface; length of primary surface; elevation.
Sec. 2b.
(1) Based upon the most precise approach available or planned for either end of a runway, the width of the primary surface is 1 of the following:
(a) For a utility runway that permits only a visual approach......................................... 250 feet (b) For a utility runway that permits a nonprecision instrument approach........................ 500 feet (c) For other than a utility runway that permits only a visual approach.................................. 500 feet (d) For other than a utility runway that permits a nonprecision instrument approach and for which the FAA has established a visibility minimum that is greater than 3/4 of a statute mile...................... 500 feet (e) For other than a utility runway that permits a nonprecision instrument approach and for which the FAA has established a visibility minimum that is as low as 3/4 of a statute mile or less................... 1,000 feet (f) For a runway that permits a precision instrument approach.................................... 1,000 feet(2) Based upon the type of runway surface, the length of the primary surface is 1 of the following:
(a) For a runway with a prepared hard surface or for which there are plans for a prepared hard surface, the length of the runway plus 200 feet beyond each end of the runway.
(b) For a runway other than a runway described in subdivision (a), the length of the runway.
(3) The elevation of a point on a primary surface is the same as the elevation of the point on the runway's centerline nearest to the point on the primary surface.
History: Add. 1986, Act 296, Eff. Apr. 1, 1987