25 §2051. Definitions
Title 25: INTERNAL SECURITY AND PUBLIC SAFETY
Part 5: PUBLIC SAFETY
Chapter 255: SAFETY GLAZING
§2051. Definitions
As used in this chapter, unless the context otherwise indicates, the following words shall have the following meanings. [1973, c. 237, (NEW).]
1. Hazardous locations. "Hazardous locations" means those installations, glazed or to be glazed in commercial and public buildings, known as framed or unframed glass entrance doors; and those installations, glazed or to be glazed in residential buildings and other structures used as dwellings, commercial buildings and public buildings, known as sliding glass doors, storm doors, shower doors, bathtub enclosures and fixed glazed panels adjacent to entrance and exit doors which because of their location present a barrier in the normal path traveled by persons going into or out of these buildings, and because of their size and design may be mistaken as means of ingress or egress; and any other installation, glazed or to be glazed, wherein the use of other than safety glazing materials would constitute an unreasonable hazard as the Commissioner of Public Safety may determine after notice and hearings, whether or not the glazing in such doors, panels, enclosures and other installations is transparent.
[ 1973, c. 237, (NEW) .]
2. Safety glazing material. "Safety glazing material" means any glazing material, such as tempered glass, laminated glass, wire glass or rigid plastic, which meets the test requirements of the then current ANSI Standard Z97.1 and such further requirements as may be adopted by the Department of Public Safety after notice and hearing and which are so constructed, treated or combined with other materials as to minimize the likelihood of cutting and piercing injuries resulting from human contact with the glazing material.
[ 1973, c. 656, (AMD) .]
SECTION HISTORY
1973, c. 237, (NEW). 1973, c. 656, (AMD).