198B.050 Uniform State Building Code.
Loading PDF...
State Building Code which shall establish standards for the construction of all
buildings, as defined in KRS 198B.010, in the state. The code shall provide that the
review and approval, as necessary, of building plans for conformance with the
Uniform State Building Code prior to construction approval shall be conducted only
by the department or a local government or governments delegated such
responsibilities by this chapter, and any exceptions to this policy shall be explicitly
stated in the code. (2) The code shall be comprehensive and shall include but not be limited to provisions for general construction; structural quality; mechanical systems to include heating,
cooling, and ventilation; electrical systems; and life safety from hazards of fire,
explosion, and other disasters, whether caused by acts of nature or man. The code
shall encompass the Kentucky State Plumbing Code promulgated pursuant to KRS
318.130, boiler rules and regulations issued pursuant to KRS 236.030, and the
national electrical code. (3) This code shall be designed after and may be selected from the models offered by such model code agencies as the Building Officials and Code Administrators,
International, Inc.; the International Conference of Building Officials; the Southern
Building Code Congress; and other nationally recognized organizations which may
include governmental agencies. The code shall:
(a) Provide uniform standards and requirements for construction and construction materials; (b) To the extent practicable, set forth standards, specifications, and requirements in terms of performance objectives, so as to facilitate the use of new
technologies, techniques, and materials. The code shall not discriminate in
favor of particular suppliers' materials, techniques, or technologies; (c) Protect the public health, safety, and welfare within the state. (4) Adoption of a code shall include provisions for the continuing review of, and the board shall adopt when deemed justified to fulfill the purposes of this chapter, new
materials, technologies, and techniques in the building industry. The board may
adopt a model code promulgated by a model code agency only if that agency
provides a method for democratic participation by the board and any local
governments which may enforce the code, in a continuing review and possible
adoption of new materials, technologies, and techniques in the building industry. (5) The board shall issue regulations, after notice in accordance with KRS Chapter 13A, which are necessary to implement the Uniform State Building Code or to carry
out any other responsibility assigned to said board by this chapter. (6) The board shall monitor the effectiveness of agencies designated by local governments to enforce the provisions of the Uniform State Building Code. (7) If the board determines that an agency is not enforcing the provisions of the Uniform State Building Code, it shall direct the department to determine where deficiencies exist. The department shall require the local government to correct the
deficiencies within sixty (60) days and report to the department its method of
correcting the deficiencies. (8) If the local government fails to correct the deficiencies, the department shall recommend to the board that the department be permitted to preempt the local
program as provided for in KRS 198B.060(4). (9) The board shall provide for the supply, including amendments and revisions thereto, of sufficient copies of the Uniform State Building Code for all interested parties. Effective: July 15, 2010
History: Amended 2010 Ky. Acts ch. 24, sec. 249, effective July 15, 2010. -- Amended 1982 Ky. Acts ch. 308, sec. 2, effective July 15, 1982. -- Created 1978 Ky. Acts
ch. 117, sec. 5, effective June 17, 1978. Legislative Research Commission Note (10/5/90). Pursuant to KRS 7.136(1), KRS Chapter 13A has been substituted for the prior reference to KRS Chapter 13 in this
statute. The sections in KRS Chapter 13 were repealed by 1984 Ky. Acts ch. 417,