(225 ILCS 325/3) (from Ch. 111, par. 5203)
(Section scheduled to be repealed on January 1, 2020)
Sec. 3. Application of the Act; Exemptions.
(a) Nothing in this Act shall be construed to prevent the practice of structural engineering as defined in the Structural Engineering Practice Act of 1989 or the practice of architecture as defined in the Illinois Architecture Practice Act of 1989 or the regular and customary practice of construction contracting and construction management as performed by construction contractors.
(b) Nothing in this Act shall be construed to prevent the regular and customary practice of a private alarm contractor licensed pursuant to the Private Detective, Private Alarm, Private Security, Fingerprint Vendor, and Locksmith Act of 2004.
(c) Nothing in this Act shall be construed to prevent a fire sprinkler contractor licensed under the Fire Sprinkler Contractor Licensing Act from providing fire protection system layout documents. For the purpose of this subsection (c), "fire protection system layout documents" means layout drawings, catalog information on standard products, and other construction data that provide detail on the location of risers, cross mains, branch lines, sprinklers, piping per applicable standard, and hanger locations. Fire protection system layout documents serve as a guide for fabrication and installation of a fire sprinkler system.
(d) A building permit for a building that requires a fire suppression system shall not be issued without the submission of a technical submission prepared and sealed by a licensed design professional. Fire protection system layout documents do not require an engineering seal if prepared by a technician who holds a valid NICET level 3 or 4 certification in fire protection technology, automatic sprinkler system layout. An authority having jurisdiction may not accept fire protection system layout documents in lieu of technical submissions. Fire protection system layout documents may be submitted as supporting documents to supplement technical submissions. However, in the event the fire protection system layout documents materially alter the technical submissions, the authority having jurisdiction shall return both the fire protection layout documents and technical submissions to the licensed design professional for review.
(e) Nothing in this Act shall prevent:
(1) Employees, including project representatives, of
| professional engineers lawfully practicing as sole owners, partnerships or corporations under this Act, from acting under the direct supervision of their employers. | |
(2) The employment of owner's representatives by the |
| owner during the constructing, adding to, or altering of a project, or any parts thereof, provided that such owner's representative shall not have the authority to deviate from the technical submissions without the prior approval of the professional engineer for the project. | |
(3) The practice of officers and employees of the |
| Government of the United States while engaged within this State in the practice of the profession of engineering for the Government. | |
(4) Services performed by employees of a business |
| organization engaged in utility, telecommunications, industrial, or manufacturing operations, or by employees of laboratory research affiliates of such business organization which are rendered in connection with the fabrication or production, sale, and installation of products, systems, or nonengineering services of the business organization or its affiliates. | |
(5) Inspection, maintenance and service work done by |
| employees of the State of Illinois, any political subdivision thereof or any municipality. | |
(6) The activities performed by those ordinarily |
| designated as chief engineer of plant operation, chief operating engineer, locomotive, stationary, marine, power plant or hoisting and portable engineers, electrical maintenance or service engineers, personnel employed in connection with construction, operation or maintenance of street lighting, traffic control signals, police and fire alarm systems, waterworks, steam, electric, and sewage treatment and disposal plants, or the services ordinarily performed by any worker regularly employed as a locomotive, stationary, marine, power plant, or hoisting and portable engineer or electrical maintenance or service engineer for any corporation, contractor or employer. | |
(7) The activities performed by a person ordinarily |
| designated as a supervising engineer or supervising electrical maintenance or service engineer who supervises the operation of, or who operates, machinery or equipment, or who supervises construction or the installation of equipment within a plant which is under such person's immediate supervision. | |
(8) The services, for private use, of contractors or |
| owners in the construction of engineering works or the installation of equipment. | |
(f) No officer, board, commission, or other public entity charged with the enforcement of codes and ordinances involving a professional engineering project shall accept for filing or approval any technical submissions that do not bear the seal and signature of a professional engineer licensed under this Act.
(Source: P.A. 96‑626, eff. 8‑24‑09.) |
(225 ILCS 325/5) (from Ch. 111, par. 5205)
(Section scheduled to be repealed on January 1, 2020)
Sec. 5. Powers and duties of the Department. Subject to the provisions of this Act, the Department shall exercise the following functions, powers and duties:
(a) To pass upon the qualifications and conduct
| examinations of applicants for licensure as professional engineers or enrollment as engineer interns and pass upon the qualifications of applicants by endorsement and issue a license or enrollment to those who are found to be fit and qualified. | |
(b) To prescribe rules for the method, conduct and |
| grading of the examination of applicants. | |
(c) To register corporations, partnerships, |
| professional service corporations, limited liability companies, and sole proprietorships for the practice of professional engineering and issue a certificate of registration to those who qualify. | |
(d) To conduct investigations and hearings regarding |
| violations of this Act and take disciplinary or other actions as provided in this Act as a result of the proceedings. | |
(e) To prescribe rules as to what shall constitute |
| an engineering or related science curriculum and to determine if a specific engineering curriculum is in compliance with the rules, and to terminate the approval of a specific engineering curriculum for non‑compliance with such rules. | |
(f) To promulgate rules required for the |
| administration of this Act, including rules of professional conduct. | |
(g) To maintain membership in the National Council |
| of Examiners for Engineering and Surveying and participate in activities of the Council by designation of individuals for the various classifications of membership, the appointment of delegates for attendance at zone and national meetings of the Council, and the funding of the delegates for attendance at the meetings of the Council. | |
(h) To obtain written recommendations from the Board |
| regarding qualifications of individuals for licensure and enrollment, definitions of curriculum content and approval of engineering curricula, standards of professional conduct and formal disciplinary actions, and the promulgation of the rules affecting these matters. | |
Prior to issuance of any final decision or order |
| that deviates from any report or recommendations of the Board relating to the qualification of applicants, discipline of licensees or registrants, or promulgation of rules, the Secretary shall notify the Board in writing with an explanation of any such deviation. The Department may at any time seek the expert advice and knowledge of the Board on any matter relating to the enforcement of this Act. | |
(i) To post on the Department's website, a |
| newsletter describing the most recent changes in this Act and the rules adopted under this Act and containing information of any final disciplinary action that has been ordered under this Act since the date of the last newsletter. | |
(j) To review such applicant qualifications to sit |
| for the examination or for licensure as the Board designates pursuant to Section 7 of this Act. | |
(Source: P.A. 96‑626, eff. 8‑24‑09.) |
(225 ILCS 325/6) (from Ch. 111, par. 5206)
(Section scheduled to be repealed on January 1, 2020)
Sec. 6. Composition, qualifications and terms of the Board.
(a) The Board shall be appointed by the Secretary and shall consist of 10 members, one of whom shall be a public member and 9 of whom shall be professional engineers licensed under this Act. In addition each member who is a professional engineer shall:
(1) be a citizen of the United States, and
(2) be a resident of this State.
(b) In addition, each member who is a professional engineer shall:
(1) have not less than 12 years of experience in the
| practice of professional engineering, and shall hold an active license as a professional engineer in Illinois; | |
(2) have been in charge of professional engineering |
| work for at least 5 years. For the purposes of this Section, any period in which a person has been in charge of teaching engineering in an engineering college with the rank of assistant professor or higher shall be considered as time in which such person was in charge of professional engineering work. | |
The terms for all members shall be for 5 years. On the expiration of the term of any member or in the event of a vacancy, the Secretary shall appoint a member who shall hold office until the expiration of the term for which the member is appointed and until a successor has been appointed and qualified.
No member shall be reappointed to the Board for a term which would cause that individual's lifetime service on the Board to be longer than 15 years.
In implementing the 5 year terms, the Secretary shall vary the terms to enable the Board to have no more than 2 terms expire in any one year.
The public member shall be a voting member and shall not hold a license as an architect, professional engineer, structural engineer, or a land surveyor. The public member shall be an Illinois resident and a citizen of the United States.
In making appointments to the Board, the Secretary shall give due consideration to recommendations by members of the profession and by organizations therein.
The Secretary may remove any member of the Board for misconduct, incompetence, neglect of duty or for reasons prescribed by law for removal of State officials.
The Secretary may remove a member of the Board who does not attend 2 consecutive meetings.
A quorum of the Board shall consist of 6 Board members. A quorum is required for Board decisions.
Each member of the Board may receive compensation as determined by the Secretary and shall be reimbursed for all actual traveling expenses.
Members of the Board shall be immune from suit in any action based upon any disciplinary proceedings or other activities performed in good faith as members of the Board.
Persons holding office as members of the Board immediately prior to the effective date of this Act under the Act repealed herein shall continue as members of the Board until the expiration of the term for which they were appointed and until their successors are appointed and qualified.
(Source: P.A. 96‑626, eff. 8‑24‑09.) |
(225 ILCS 325/7) (from Ch. 111, par. 5207)
(Section scheduled to be repealed on January 1, 2020)
Sec. 7. Powers and duties of the Board. Subject to the provisions of this Act, the Board shall exercise the following functions, powers, and duties:
(a) Review applicant qualifications to sit for the
| examination or for licensure and shall make recommendations to the Department except for those applicant qualifications that the Board designates as routinely acceptable; | |
(b) The Board may appoint a subcommittee to serve as |
| a Complaint Committee to recommend the disposition of case files according to procedures established by rule in 68 Ill. Adm. Code 1380.305, and any changes and amendments thereto; | |
(c) Conduct hearings regarding disciplinary actions |
| and submit a written report and recommendations to the Secretary as required by this Act and to provide a Board member at informal conferences; | |
(d) Make visits to universities or colleges to |
| evaluate engineering curricula or to otherwise evaluate engineering curricula and submit to the Secretary a written recommendation of acceptability of a curriculum; | |
(e) Submit a written recommendation to the Secretary |
| concerning promulgation of rules as required in Section 5 and to recommend to the Secretary any rules or amendments thereto for the administration of this Act; | |
(f) Hold at least 3 regular meetings each year;
(g) Elect annually a chairperson and a |
| vice‑chairperson who shall be professional engineers; and | |
(h) Submit written comments to the Secretary within |
| 30 days from notification of any final decision or order from the Secretary that deviates from any report or recommendation of the Board relating to the qualification of applicants, discipline of licensees or registrants, or promulgation of rules. | |
(Source: P.A. 96‑626, eff. 8‑24‑09.) |
(225 ILCS 325/8) (from Ch. 111, par. 5208)
(Text of Section before amendment by P.A. 96‑850)
(Section scheduled to be repealed on January 1, 2020)
Sec. 8. Applications for licensure.
(a) Applications for licensure shall (1) be on forms prescribed and furnished by the Department, (2) contain statements made under oath showing the applicant's education and a detailed summary of the applicant's technical work, and (3) contain references as required by the Department.
(b) Applicants shall have obtained the education and experience as required in Section 10 or Section 11 prior to submittal of application for examination, except as provided in subsection (b) of Section 11. Allowable experience shall commence at the date of the baccalaureate degree, except:
(1) Credit for one year of experience shall be given
| for a graduate of a baccalaureate curriculum providing a cooperative program, which is supervised industrial or field experience of at least one academic year which alternates with periods of full‑time academic training, when such program is certified by the university, or | |
(2) Partial credit may be given for professional |
| engineering experience as defined by rule for employment prior to receipt of a baccalaureate degree if the employment is full‑time while the applicant is a part‑time student taking fewer than 12 hours per semester or 8 hours per quarter to earn the degree concurrent with the full‑time engineering experience. | |
(3) If an applicant files an application and |
| supporting documents containing a material misstatement of information or a misrepresentation for the purpose of obtaining licensure or enrollment or if an applicant performs any fraud or deceit in taking any examination to qualify for licensure or enrollment under this Act, the Department may issue a rule of intent to deny licensure or enrollment and may conduct a hearing in accordance with Sections 26 through 33 and Sections 37 and 38 of this Act. | |
The Board may conduct oral interviews of any applicant under Sections 10, 11, or 19 to assist in the evaluation of the qualifications of the applicant.
It is the responsibility of the applicant to supplement the application, when requested by the Board, by provision of additional documentation of education, including transcripts, course content and credentials of the engineering college or college granting related science degrees, or of work experience to permit the Board to determine the qualifications of the applicant. The Department may require an applicant, at the applicant's expense, to have an evaluation of the applicant's education in a foreign country by a nationally recognized evaluating service approved by the Department.
An applicant who graduated from an engineering program outside the United States or its territories and whose first language is not English shall submit certification of passage of the Test of English as a Foreign Language (TOEFL) and a test of spoken English as defined by rule.
(Source: P.A. 96‑626, eff. 8‑24‑09.)
(Text of Section after amendment by P.A. 96‑850)
(Section scheduled to be repealed on January 1, 2020)
Sec. 8. Applications for licensure.
(a) Applications for licensure shall (1) be on forms prescribed and furnished by the Department, (2) contain statements made under oath showing the applicant's education and a detailed summary of the applicant's technical work, and (3) contain references as required by the Department.
(b) Applicants shall have obtained the education and experience as required in Section 10 or Section 11 prior to submittal of application for licensure. Allowable experience shall commence at the date of the baccalaureate degree, except:
(1) Credit for one year of experience shall be given |
| for a graduate of a baccalaureate curriculum providing a cooperative program, which is supervised industrial or field experience of at least one academic year which alternates with periods of full‑time academic training, when such program is certified by the university, or | |
(2) Partial credit may be given for professional |
| engineering experience as defined by rule for employment prior to receipt of a baccalaureate degree if the employment is full‑time while the applicant is a part‑time student taking fewer than 12 hours per semester or 8 hours per quarter to earn the degree concurrent with the full‑time engineering experience. | |
(3) If an applicant files an application and |
| supporting documents containing a material misstatement of information or a misrepresentation for the purpose of obtaining licensure or enrollment or if an applicant performs any fraud or deceit in taking any examination to qualify for licensure or enrollment under this Act, the Department may issue a rule of intent to deny licensure or enrollment and may conduct a hearing in accordance with Sections 26 through 33 and Sections 37 and 38 of this Act. | |
The Board may conduct oral interviews of any applicant under Sections 10, 11, or 19 to assist in the evaluation of the qualifications of the applicant.
It is the responsibility of the applicant to supplement the application, when requested by the Board, by provision of additional documentation of education, including transcripts, course content and credentials of the engineering college or college granting related science degrees, or of work experience to permit the Board to determine the qualifications of the applicant. The Department may require an applicant, at the applicant's expense, to have an evaluation of the applicant's education in a foreign country by a nationally recognized evaluating service approved by the Department.
&nbs
|