CFR > Title 9 - Animals and Animal Products > CHAPTER III—FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE > SUBCHAPTER A—AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION (parts 300 to 381) > PART 381—POULTRY PRODUCTS INSPECTION REGULATIONS > SUBPART X—Canning and Canned Products (§381.300 to §381.311) > 381.303—Critical factors and the application of the process schedule.

381.303—Critical factors and the application of the process schedule.

Critical factors specified in the process schedule shall be measured, controlled and recorded by the establishment to ensure that these factors remain within the limits used to establish the process schedule. Examples of factors that are often critical to process schedule adequacy may include:
(a) General. (1) Maximum fill-in weight or drained weight;
(2) Arrangement of pieces in the container;
(3) Container orientation during thermal processing;
(4) Product formulation;
(5) Particle size;
(6) Maximum thickness for flexible, and to some extent semirigid containers during thermal processing;
(7) Maximum pH;
(8) Percent salt;
(9) Ingoing (or formulated) nitrite level (ppm);
(10) Maximum water activity; and
(11) Product consistency or viscosity.
(b) Continuous rotary and batch agitating retorts. (1) Minimum headspace; and
(2) Retort reel speed.
(c) Hydrostatic retorts. (1) Chain or conveyor speed.
(d) Steam/air retorts. (1) Steam/air ratio; and
(2) Heating medium flow rate.
(Approved by the Office of Management and Budget under control number 0583-0015)