58.236—Pasteurization and heat treatment.
All milk and buttermilk used in the manufacture of dry milk products and modified dry milk products shall be pasteurized at the plant where dried, except that acidified buttermilk containing 40 percent or more solids may be transported to another plant for drying without repasteurization. Provided the condensed product is handled according to sanitary conditions approved by the Administrator.
(a) Pasteurization.
(1)
All milk or skim milk to be used in the manufacture of nonfat dry milk shall be pasteurized prior to condensing at a minimum temperature of 161 °F. for at least 15 seconds or its equivalent in bacterial destruction. Condensed milk products made from pasteurized milk may be transported to a drying plant, provided that it shall be effectively repasteurized at the drying plant, prior to drying, at no less than 166 °F. for 15 seconds or its equivalent in bacterial destruction.
(2)
All buttermilk to be used in the manufacture of dry buttermilk or dry buttermilk product shall be pasteurized prior to condensing at a temperature of 161 °F for 15 seconds or its equivalent in bacterial destruction.
(b) Heat treatment—
(1) High-heat. The finished product shall not exceed 1.5 mg. undenatured whey protein nitrogen per gram of nonfat dry milk as classified in the U.S. Standards for Grades of Nonfat Dry Milk (Spray Process).
(2) Medium-heat.
The finished product shall show undenatured whey protein nitrogen between the levels of “high-heat” and “low-heat” (1.51 to 5.99 mg.).
(3) Low-heat.
The finished product shall show not less than 6.0 undenatured whey protein nitrogen per gram of non-fat dry milk as classified in the U.S. Standards for Grades of Nonfat Dry Milk (Spray Process).