648.200—Specifications.
(a)
The Atlantic Herring Plan Development Team (PDT) shall meet at least every 3 years, but no later than July of the year before new specifications are implemented, with the Atlantic States Marine Fisheries Commission's (Commission) Atlantic Herring Plan Review Team (PRT) to develop and recommend the following specifications for a period of 3 years for consideration by the New England Fishery Management Council's Atlantic Herring Oversight Committee: Optimum yield (OY), domestic annual harvest (DAH), domestic annual processing (DAP), total foreign processing (JVPt), joint venture processing (JVP), internal waters processing (IWP), U.S. at-sea processing (USAP), border transfer (BT), total allowable level of foreign fishing (TALFF), reserve (if any), and the amount to be set aside for the RSA (from 0 to 3 percent of the TAC from any management area). The PDT and PRT shall also recommend the total allowable catch (TAC) for each management area and sub-area, including seasonal quotas as specified at § 648.201(f). Recommended specifications shall be presented to the New England Fishery Management Council (Council).
(1)
The PDT shall meet with the Commission's PRT to review the status of the stock and the fishery and prepare a Stock Assessment and Fishery Evaluation (SAFE) report at least every 3 years. The Herring PDT will meet at least once during interim years to review the status of the stock relative to the overfishing definition if information is available to do so. When conducting a 3-year review and preparing a SAFE Report, the PDT/PRT will recommend to the Council/Commission any necessary adjustments to the specifications for the upcoming 3 years.
(2)
If the Council determines, based on information provided by the PDT/PRT or other stock-related information, that the specifications should be adjusted during the 3-year time period, it can do so through the same process outlined in this section during one or both of the interim years.
(b) Guidelines.
As the basis for its recommendations under paragraph (a) of this section, the PDT shall review available data pertaining to: Commercial and recreational catch data; current estimates of fishing mortality; discards; stock status; recent estimates of recruitment; virtual population analysis results and other estimates of stock size; sea sampling and trawl survey data or, if sea sampling data are unavailable, length frequency information from trawl surveys; impact of other fisheries on herring mortality; and any other relevant information. The specifications recommended pursuant to paragraph (a) of this section must be consistent with the following:
(1)
OY must be equal to or less than the allowable biological catch (ABC), as adjusted by subtracting an estimate of the expected Canadian New Brunswick fixed gear and GB herring catch.
(2)
OY must not exceed MSY, unless an OY that exceeds MSY in a specific year is consistent with a control rule that ensures the achievement of MSY and OY on a continuing basis.
(iii)
The requirement to insure the availability of herring to provide controlled opportunities for vessels in other fisheries in the Mid-Atlantic and New England;
(vii)
U.S. export potential based on expected U.S. harvests, expected U.S. consumption, relative prices, exchange rates, and foreign trade barriers;
(4)
Adjustments to TALFF, if any, shall be made based on updated information relating to status of stocks, estimated and actual performance of domestic and foreign fleets, and other relevant factors.
(c)
The Atlantic Herring Oversight Committee shall review the recommendations of the PDT and shall consult with the Commission's Herring Section. Based on these recommendations and any public comment received, the Herring Oversight Committee shall recommend to the Council appropriate specifications for a 3-year period. The Council shall review these recommendations and, after considering public comment, shall recommend appropriate 3-year specifications to NMFS. NMFS shall review the recommendations, consider any comments received from the Commission, and publish notification in the Federal Register proposing 3-year specifications. If the proposed specifications differ from those recommended by the Council, the reasons for any differences shall be clearly stated and the revised specifications must satisfy the criteria set forth in paragraph (b) of this section.
(d)
NMFS shall make a final determination concerning the specifications for Atlantic herring. Notification of the final specifications and responses to public comments shall be published in the Federal Register. If the final specification amounts differ from those recommended by the Council, the reason(s) for the difference(s) must be clearly stated and the revised specifications must be consistent with the criteria set forth in paragraph (b) of this section. The previous year's specifications shall remain effective until they are revised through the specification process.
(e) In-season adjustments.
(1)
The specifications and TACs established pursuant to this section may be adjusted by NMFS, after consulting with the Council, during the fishing year by publishing notification in the Federal Register stating the reasons for such action and providing an opportunity for prior public comment. Any adjustments must be consistent with the Atlantic Herring FMP objectives and other FMP provisions.
(2)
If a total allowable catch reserve (TAC reserve) is specified for an area, NMFS may make any or all of that TAC reserve available to fishers after consulting with the Council. NMFS shall propose any release of the TAC reserve in the Federal Register and provide an opportunity for public comment. After considering any comments received, any release of the TAC reserve shall be announced through notification in the Federal Register.
(f) Management areas.
The specifications process establishes TACs and other management measures for the three management areas, which may have different management measures. Management Area 1 is subdivided into inshore and offshore sub-areas. The management areas are defined as follows:
(1) Management Area 1 (Gulf of Maine):
All U.S. waters of the Gulf of Maine (GOM) north of a line extending from a point at 70°00′ W. long. and 41°39′ N. to 42°53′14″ N. lat., 67° 44′35″ W. long., thence northerly along the Hague Line to the U.S.-Canadian border, to include state and Federal waters adjacent to the States of Maine, New Hampshire, and Massachusetts. Management Area 1 is divided into Area 1A (inshore) and Area 1B (offshore). The line dividing these areas is described by the following coordinates:
| Point | N. lat. | W. long. |
|---|---|---|
| 1 | 41°58′ | 70° 00′ |
| 2 | 42°38′ | 70° 00′ |
| 3 | 42°53′ | 69° 40′ |
| 4 | 43°12′ | 69° 00′ |
| 5 | 43°40′ | 68° 00′ |
| 6 | 43°58′ | 67° 22′(the U.S.-Canada Maritime Boundary) |
(2) Management Area 2 (South Coastal Area):
All waters west of 70° 00′ W . long., south of 41°39′ N. lat., to include state and Federal waters adjacent to the States of Massachusetts, Rhode Island, Connecticut, New York, New Jersey, Delaware, Maryland, Virginia, and North Carolina.
(3) Management Area 3 (Georges Bank):
All U.S. waters east of 70°00′ W. long. and southeast of the line that runs from a point at 70°00′ W. long. and 41°39′ N. lat., northeasterly to the Hague Line at 42°53′14″ N. lat., 67°44′35″ W. long.
[72 FR 11277, Mar. 12, 2007, as amended at 73 FR 4757, Jan. 28, 2008]