665.13—Test report and manufacturer certification.
(a)
Upon completion of testing, the operator of the facility shall provide the resulting test report to the entity that submitted the bus for testing.
(b)
(1)
A manufacturer or dealer of a new bus model or a bus produced with a major change in component or configuration shall provide a copy of the corresponding full bus testing report and any applicable partial testing report(s) to a recipient during the point in the procurement process specified by the recipient, but in all cases before final acceptance of the first bus by the recipient.
(2)
A manufacturer who releases a report under paragraph (b)(1) of this section also shall provide notice to the operator of the facility that the report is available to the public.
(c)
If a bus model subject to a bus testing report has a change that is not a major change under this Part, the manufacturer or dealer shall advise the recipient during the procurement process and shall include a description of the change and the manufacturer's basis for concluding that it is not a major change.
(d)
A bus testing report shall be available publicly once the bus manufacturer makes it available during a recipient's procurement process. The operator of the facility shall have copies of all the publicly available reports available for distribution.
(e)
The bus testing report is the only information or documentation that shall be made publicly available in connection with any bus model tested at the bus testing facility.