665.11—Testing requirements.
(2)
Meet all applicable Federal Motor Vehicle Safety Standards, as defined by the National Highway Traffic Safety Administration in Part 571 of this title; and
(3)
Be substantially fabricated and assembled using the techniques, tooling, and materials that will be used in production of subsequent buses of that model.
(b)
If the new bus model has not previously been tested at the bus testing facility, then the new bus model shall undergo the full tests requirements for Maintainability, Reliability, Safety, Performance including braking performance, Structural Integrity, Fuel Economy, Noise, and Emissions;
(c)
If the new bus model has not previously been tested at the bus testing facility and is being produced on a third-party chassis that has been previously tested on another bus model at the bus testing facility, then the new bus model may undergo partial testing requirements;
(d)
If the new bus model has previously been tested at the bus testing facility, but is subsequently manufactured with a major change in chassis or components, then the new bus model may undergo partial testing.
(1)
Large-size, heavy-duty transit buses (approximately 35′-40′ in length, as well as articulated buses) with a minimum service life of 12 years or 500,000 miles;
(2)
Medium-size, heavy-duty transit buses (approximately 30′ in length) with a minimum service life of ten years or 350,000 miles;
(3)
Medium-size, medium duty transit buses (approximately 30′ in length) with a minimum service life of seven years or 200,000 miles;
(4)
Medium-size, light duty transit buses (approximately 25′-35′ in length) with a minimum service life of five years or 150,000 miles; and
(5)
Other light duty vehicles such as small buses and regular and specialized vans with a minimum service life of four years or 100,000 miles.
(f)
Tests performed in a higher service life category (i.e., longer service life) need not be repeated when the same bus model is used in lesser service life applications.
(g)
The operator of the bus testing facility shall develop a test plan for the testing of vehicles at the facility. The test plan shall follow the guidelines set forth in the appendix to this part.