564.2—Purposes.
The purposes of this part are achieved through its Appendices:
(a)
The purposes of appendix A of this part are to ensure
(1)
The availability to replacement light source manufacturers of the manufacturing specifications of original equipment light sources so that replacement light sources are interchangeable with original equipment light sources and provide equivalent performance, and
(2)
That redesigned or newly developed light sources are designated as distinct, different, and noninterchangeable with previously existing light sources.
(b)
The purposes of appendix B of this part are to ensure
(1)
That original equipment light sources are replaceable and that replacement light sources provide equivalent performance, and
(2)
That redesignated or newly developed light sources are designated as distinct, different, and noninterchangeable with previously existing light sources.
[61 FR 20500, May 7, 1996]
Code of Federal Regulations
Effective Date Note:
At 72 FR 68266, Dec. 4, 2007, part 564 was revised, effective Sept. 1, 2008. At 73 FR 50730, Aug. 28, 2008, the revision was delayed until Dec. 1, 2009. At 74 FR 58214, Nov. 12, 2009, the revision was further delayed until Dec. 1, 2012. For the convenience of the user, the revised text is set forth as follows:
PART 564—REPLACEABLE LIGHT SOURCE AND SEALED BEAM HEADLAMP INFORMATION (Eff. 12-01-12)
§ 564.2
Purposes.
The purposes of this part are achieved through its Appendices:
(a)
The purposes of appendix A of this part are to ensure:
(1)
The availability to replacement light source manufacturers of the manufacturing specifications of original equipment light sources so that replacement light sources are interchangeable with original equipment light sources and provide equivalent performance, and
(2)
That redesigned or newly developed light sources are designated as distinct, different, and noninterchangeable with previously existing light sources.
(b)
The purposes of appendix B of this part are to ensure:
(1)
That original equipment light sources are replaceable and that replacement light sources provide equivalent performance, and
(2)
That redesigned or newly developed light sources are designated as distinct, different, and noninterchangeable with previously existing light sources.
(c)
The purpose of appendix C of this part is to ensure the availability to original equipment and replacement sealed beam headlamp manufacturers of the manufacturing specifications of standardized sealed beam headlamp units used on motor vehicles so that all sealed beam headlamp units of a specific type are interchangeable with all other units of that same type and provide equivalent performance.