SUBPART H—Corrosion Control (§195.551 to §195.589)
- 195.551—What do the regulations in this subpart cover?
- 195.553—What special definitions apply to this subpart?
- 195.555—What are the qualifications for supervisors?
- 195.557—Which pipelines must have coating for external corrosion control?
- 195.559—What coating material may I use for external corrosion control?
- 195.561—When must I inspect pipe coating used for external corrosion control?
- 195.563—Which pipelines must have cathodic protection?
- 195.565—How do I install cathodic protection on breakout tanks?
- 195.567—Which pipelines must have test leads and what must I do to install and maintain the leads?
- 195.569—Do I have to examine exposed portions of buried pipelines?
- 195.571—What criteria must I use to determine the adequacy of cathodic protection?
- 195.573—What must I do to monitor external corrosion control?
- 195.575—Which facilities must I electrically isolate and what inspections, tests, and safeguards are required?
- 195.577—What must I do to alleviate interference currents?
- 195.579—What must I do to mitigate internal corrosion?
- 195.581—Which pipelines must I protect against atmospheric corrosion and what coating material may I use?
- 195.583—What must I do to monitor atmospheric corrosion control?
- 195.585—What must I do to correct corroded pipe?
- 195.587—What methods are available to determine the strength of corroded pipe?
- 195.588—What standards apply to direct assessment?
- 195.589—What corrosion control information do I have to maintain?