192.315—Wrinkle bends in steel pipe.
(a)
A wrinkle bend may not be made on steel pipe to be operated at a pressure that produces a hoop stress of 30 percent, or more, of SMYS.
(2)
When measured along the crotch of the bend, the wrinkles must be a distance of at least one pipe diameter.
(3)
On pipe 16 inches (406 millimeters) or larger in diameter, the bend may not have a deflection of more than 1 1/2 ° for each wrinkle.
(4)
On pipe containing a longitudinal weld the longitudinal seam must be as near as practicable to the neutral axis of the bend.
[35 FR 13257, Aug. 19, 1970, as amended by Amdt. 192-85, 63 FR 37503, July 13, 1998]