173.4a—Excepted quantities.
(a)
Excepted quantities of materials other than articles transported in accordance with this section are not subject to any additional requirements of this subchapter except for:
(1)
The shipper's responsibilities to properly class their material in accordance with § 173.22 of this subchapter;
(b) Authorized materials.
Only materials authorized for transport aboard passenger aircraft and appropriately classed within one of the following hazard classes or divisions may be transported in accordance with this section:
(c) Inner packaging limits.
The maximum quantity of hazardous materials in each inner packaging is limited to:
(2)
30 g (1 ounce) or 30 mL (1 ounce) for solids or liquids other than those covered in paragraph (c)(1) of this section; and
(d) Outer packaging aggregate quantity limits.
The maximum aggregate quantity of hazardous material contained in each outer packaging must not exceed the limits provided in the following paragraphs. For outer packagings containing more than one hazardous material, the aggregate quantity of hazardous material must not exceed the lowest permitted maximum aggregate quantity. The limits are as follows:
(e) Packaging materials.
Packagings used for the transport of excepted quantities must meet the following:
(1)
Each inner receptacle must be constructed of plastic, or of glass, porcelain, stoneware, earthenware or metal. When used for liquid hazardous materials, plastic inner packagings must have a thickness of not less than 0.2 mm (0.008 inch).
(2)
Each inner packaging with a removable closure must have its closure held securely in place with wire, tape or other positive means. Each inner receptacle having a neck with molded screw threads must have a leak proof, threaded type cap. The closure must not react chemically with the material.
(3)
Each inner packaging must be securely packed in an intermediate packaging with cushioning material in such a way that, under normal conditions of transport, it cannot break, be punctured or leak its contents. The intermediate packaging must completely contain the contents in case of breakage or leakage, regardless of package orientation. For liquid hazardous materials, the intermediate packaging must contain sufficient absorbent material that:
(ii)
Will not react dangerously with the material or reduce the integrity or function of the packaging materials.
(5)
Placement of the material in the package or packing different materials in the package must not result in a violation of § 173.21.
(6)
Each package must be of such a size that there is adequate space to apply all necessary markings.
(8)
Overpacks may be used and may also contain packages of hazardous material or other materials not subject to the HMR subject to the requirements of § 173.25.
(f) Package tests.
The completed package as prepared for transport, with inner packagings filled to not less than 95% of their capacity for solids or 98% for liquids, must be capable of withstanding, as demonstrated by testing which is appropriately documented, without breakage or leakage of any inner packaging and without significant reduction in effectiveness:
(i)
Where the sample is in the shape of a box, it must be dropped in each of the following orientations:
(ii)
Where the sample is in the shape of a drum, it must be dropped in each of the following orientations:
(A)
One drop diagonally on the top chime, with the center of gravity directly above the point of impact;
(2)
A compressive load as specified in § 178.606(c) of this subchapter. Each of the tests in this paragraph (f) of this section may be performed on a different but identical package; that is, all tests need not be performed on the same package.
(g) Marking.
Excepted quantities of hazardous materials packaged, marked, and otherwise offered and transported in accordance with this section must be durably and legibly marked with the following marking:
Code of Federal Regulations
Code of Federal Regulations
417
(1)
The “*” must be replaced by the primary hazard class, or when assigned, the division of each of the hazardous materials contained in the package. The “**” must be replaced by the name of the shipper or consignee if not shown elsewhere on the package.
(2)
The marking must not be less than 100 mm (3.9 inches) by 100 mm (3.9 inches), and must be durable and clearly visible.
(2)
For transport by air, a shipping paper is not required, except that, if a document such as an air waybill accompanies a shipment, the document must include the statement “Dangerous Goods in Excepted Quantities” and indicate the number of packages.
(3)
For transport by vessel, a shipping paper is required and must include the statement “Dangerous Goods in Excepted Quantities” and indicate the number of packages.
(i) Training.
Each person who offers or transports excepted quantities of hazardous materials must know about the requirements of this section.
(j) Restrictions.
Hazardous material packaged in accordance with this section may not be carried in checked or carry-on baggage.
[74 FR 2254, Jan. 14, 2009, as amended at 75 FR 72, Jan. 4, 2010]