39.10-5—Incorporation by reference—TB/ALL.
(a)
Certain materials are incorporated by reference into this part with the approval of the Director of the Federal Register in accordance with 5 U.S.C. 552(a). To enforce any edition other than the one listed in paragraph (b) of this section, notice of change must be published in the Federal Register and the material made available to the public. All approved material is on file at the U.S. Coast Guard, Office of Operating and Environmental Standards (CG-522), 2100 2nd St. SW., Stop 7126, Washington, DC 20593-7126, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. All material is available from the sources indicated in paragraph (b) of this section.
(b)
The material approved for incorporation by reference in this part, and the sections affected are:
| American Petroleum Institute (API), 1220 L Street NW., Washington, DC 20005 | |
| API Standard 2000, Venting Atmospheric and Low-Pressure Storage Tanks (Nonrefrigerated and Refrigerated), Third Edition, January 1982 (reaffirmed December 1987) | 39.20-11 |
| American National Standards Institute (ANSI), 11 West 42nd Street, New York, NY 10036 | |
| ANSI B16.5, Steel Pipe Flanges and Flanged Fittings, 1981 | 39.20-1 |
| American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959 | |
| ASTM F 1271-90 (1995)—Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protection Applications | 39.20-9 |
| International Electrotechnical Commission (IEC), Bureau Central de la Commission Electrotechnique Internationale, 1 rue de Varembé, Geneva, Switzerland | |
| IEC 309-1—Plugs, Socket-Outlets and Couplers for Industrial Purposes: Part 1 , General Requirements, 1979 | 39.20-9 |
| IEC 309-2—Plugs, Socket-Outlets and Couplers for Industrial Purposes: Part 2 , Dimensional Interchangeability Requirements for Pin and Contact-tube Accessories, 1981 | 39.20-9 |
| National Electrical Manufacturers Association (NEMA), 2101 L St. NW., Washington, DC 20036 | |
| ANSI/NEMA WD6—Wiring Devices, Dimensional Requirements, 1988 | 39.20-9 |
| National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02269 | |
| NFPA 70—National Electrical Code, 1987 | 39.20-9 |
| Oil Companies International Marine Forum (OCIMF), 15th Floor, 96 Victoria Street, London SWIE 5JW, England | |
| International Safety Guide for Oil Tankers and Terminals, Third Edition, 1988 | 39.30-1 |
[CGD 88-102, 55 FR 25446, June 21, 1990, as amended by CGD 95-072, 60 FR 50462, Sept. 29, 1995; CGD 96-041, 61 FR 50727, Sept. 27, 1996; CGD 97-057, 62 FR 51043, Sept. 30, 1997; USCG-1999-5151, 64 FR 67177, Dec. 1, 1999]