CFR > Title 46 - Shipping > CHAPTER I—COAST GUARD, DEPARTMENT OF HOMELAND SECURITY > SUBCHAPTER T—SMALL PASSENGER VESSELS (UNDER 100 GROSS TONS) (parts 175 to 186) > PART 175—GENERAL PROVISIONS > 175.600—Incorporation by reference.

175.600—Incorporation by reference.

(a) Certain material is incorporated by reference into this subchapter with the approval of the Director of the Federal Register under 5 U.S.C. 552(a) and 1 CFR part 51. To enforce any edition other than that specified in this section, the Coast Guard must publish notice of change in the Federal Register and the material must be available to the public. All approved material is available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030 or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. The material is also available for inspection at the U.S. Coast Guard, Office of Design and Engineering Standards (CG-521), 2100 2nd St., SW., Stop 7126, Washington, DC 20593-7126, and is available from the sources listed below.
(b) The material approved for incorporation by reference in this subchapter and the sections affected are shown in Table 175.600:
Table 175.600: Subchapter T Incorporations by Reference
Standards organization and name of standard Section(s) incorporating the standard
American Boat and Yacht Council (ABYC), 613 Third Street, Suite 10, Annapolis, MD 21403
A-1-93—Marine Liquefied Petroleum Gas (LPG) Systems (“ABYC A-1”) 184.240.
A-3-93—Galley Stoves (“ABYC A-3”) 184.200.
A-7-70—Boat Heating Systems (“ABYC A-7”) 184.200.
A-16-89—Electric Navigation Lights (“ABYC A-16”) 183.130.
A-22-93—Marine Compressed Natural Gas (CNG) Systems (“ABYC A-22”) 184.240.
E-8 Alternating Current (AC) Electrical Systems on Boats (July 2001) (“ABYC E-8”) 183.130; 183.340.
E-9 Direct Current (DC) Electrical Systems on Boats (May 28, 1990) (“ABYC E-9”) 183.130; 183.340.
H-2-89—Ventilation of Boats Using Gasoline (“ABYC H-2”) 183.130; 182.460.
H-22-86—DC Electric Bilge Pumps Operating Under 50 Volts (“ABYC H-22”) 182.130; 182.500.
H-24-93—Gasoline Fuel Systems (“ABYC H-24”) 182.130; 182.440; 182.445; 182.450; 182.455.
Code of Federal Regulations 183
H-25-94—Portable Gasoline Fuel Systems for Flammable Liquids (“ABYC H-25”) 182.130; 182.458.
H-32-87—Ventilation of Boats Using Diesel Fuel (“ABYC H-32”) 182.130; 182.465; 182.470.
H-33-89—Diesel Fuel Systems (“ABYC H-33”) 182.130; 182.440; 182.445; 182.450; 182.455.
P-1-93—Installation of Exhaust Systems for Propulsion and Auxiliary Engines (“ABYC P-1”) 177.405; 177.410; 182.130; 182.425; 182.430.
P-4-89—Marine Inboard Engines (“ABYC P-4”) 182.130; 182.420.
American Bureau of Shipping (ABS), ABS Plaza, 16855 Northchase Drive, Houston, TX 77060
Guide for High Speed Craft, 1997 (“ABS High Speed Craft”) 177.300.
Rules for Building and Classing Aluminum Vessels, 1975 (“ABS Aluminum Vessel Rules”) 177.300.
Rules for Building and Classing Reinforced Plastic Vessels, 1978 (“ABS Plastic Vessel Rules”) 177.300.
Rules for Building and Classing Steel Vessels, 1995 (“ABS Steel Vessel Rules”) 183.360.
Rules for Building and Classing Steel Vessels Under 61 Meters (200 feet) in Length, 1983 (“ABS Steel Vessel Rules (< 61 Meters)”) 177.300.
Rules for Building and Classing Steel Vessels for Service on Rivers and Intracoastal Waterways, 1995 (“ABS Steel Vessel Rules (Rivers/Intracoastal)”) 177.300.
American National Standards Institute (ANSI), 11 West 42nd Street, New York, NY 10036
A 17.1-1984, including supplements A 17.1a and B-1985—Safety Code for Elevators and Escalators (“ANSI A 17.1”) 183.540.
B 31.1-1986—Code for Pressure Piping, Power Piping (“ANSI B 31.1”) 182.710.
Motor Vehicles Operating on Land Highways (“ANSI Z 26.1”) 177.1030.
ASTM International (formerly American Society for Testing and Materials) (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM B 96-93, Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels (“ASTM B 96”) 182.440.
ASTM B 117-97, Standard Practice for Operating Salt Spray (Fog) Apparatus (“ASTM B 117”) 175.400.
ASTM B 122/B 122M-95, Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip and Rolled Bar (“ASTM B 122”) 182.440.
ASTM B 127-98, Standard Specification for Nickel-Copper Alloy (UNS NO4400) Plate, Sheet, and Strip (“ASTM B 127”) 182.440.
ASTM B 152-97a, Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar (“ASTM B 152”) 182.440.
ASTM B 209-96, Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (“ASTM B 209”) 182.440.
ASTM D 93-97, Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester (“ASTM D 93”) 175.400.
ASTM D 635-97, Standard test Method for Rate of Burning and or Extent and Time of Burning of Self-Supporting Plastics in a Horizontal Position (“ASTM D 635”) 182.440.
ASTM D 2863-95, Standard Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index) (“ASTM D 2863”) 182.440.
ASTM E 84-98, Standard Test Method for Surface Burning Characteristics of Building Materials (“ASTM E 84”) 177.410.
Institute of Electrical and Electronics Engineers, Inc. (IEEE), IEEE Service Center, 445 Hoes Lane, Piscataway, NJ 08854
Standard 45-1977—Recommended Practice for Electrical Installations on Shipboard (“IEEE 45-1977”) 183.340.
International Organization for Standardization (ISO), Case postale 56, CH-1211 Geneva 20, Switzerland
ISO 8846, Small Craft-Electrical Devices-Protection Against Ignition of Surrounding Flammable Gases (Dec. 1990) (“ISO 8846”) 182.500.
ISO 8849, Small Craft-Electrically Operated Bilge Pumps (Dec. 15, 1990) (“ISO 8849”) 182.500.
International Maritime Organization (IMO), International Maritime Organization, Publications Section, 4 Albert Embankment, London SE1 7SR, United Kingdom
Code of Federal Regulations 184
Code of Practice for the Evaluation, Testing and Acceptance of Prototype Novel Life-Saving Appliances and Arrangements-Resolution A.520(13), dated 17 November 1983 (“IMO Resolution A.520(13)”) 175.540.
Use and Fitting of Retro-Reflective Materials on Life-Saving Appliances-Resolution A.658(16), dated 20 November 1989 (“IMO Resolution A.658(16)”) 185.604.
Fire Test Procedures For Ignitability of Bedding Components, Resolution A.688(17), dated 06 November 1991 (“IMO Resolution A.688(17)”) 177.405.
Symbols Related to Life-Saving Appliances and Arrangements, Resolution A.760(18), dated 17 November 1993 (“IMO Resolution A.760(18)” 185.604.
Lloyd's Register of Shipping, 71 Fenchurch Street, London EC3M 4BS
Rules and Regulations for the Classification of Yachts and Small Craft, as amended through 1983 (“Lloyd's Yachts and Small Craft”) 177.300.
National Fire Protection Association (NFPA), 1 Batterymarch Park, Quincy, MA 02269-9101.
NFPA 10-1994—Portable Fire Extinguishers (“NFPA 10”) 176.810.
NFPA 17-1994—Dry Chemical Extinguishing Systems (“NFPA 17”) 181.425.
NFPA 17A-1994—Wet Chemical Extinguishing Systems (“NFPA 17A”) 181.425.
NFPA 70-1996—National Electrical Code (NEC) (“NFPA 70”) 183.320; 183.340; 183.372.
NFPA 302-1994—Pleasure and Commercial Motor Craft, Chapter 6 (“NFPA 302”) 184.200; 184.240.
NFPA 306-1993—Control of Gas Hazards on Vessels (“NFPA 306”) 176.710.
NFPA 1963-1989—Fire Hose Connections (“NFPA 1963”) 181.320.
Naval Publications and Forms Center, Customer Service Code 1052, 5801 Tabor Ave., Philadelphia, PA 19120
Military Specification MIL-P-21929C (1991)—Plastic Material, Cellular Polyurethane, Foam-in-Place, Rigid (2 and 4 pounds per cubic foot) (“NPFC MIL-P-21929C”) 179.240.
Military Specification MIL-R-21607E(SH) (1990)—Resins, Polyester, Low Pressure Laminating, Fire Retardant (“NPFC MIL-R-21607E(SH)”) 177.410.
Society of Automotive Engineers (SAE), 400 Commonwealth Drive, Warrendale, PA 15096-0001
SAE J-1475—Hydraulic Hose Fittings For Marine Applications, 1984 (“SAE J-1475”) 182.720.
SAE J-1928—Devices Providing Backfire Flame Control for Gasoline Engines in Marine Applications, August 1989 (“SAE J-1928”) 182.415.
SAE J-1942—Hose and Hose Assemblies for Marine Applications, 1992 (“SAE J-1942”) 182.720.
Underwriters Laboratories Inc. (UL), 12 Laboratory Drive, Research Triangle Park, NC 27709
UL 19-1992—Lined Fire Hose and Hose Assemblies (“UL 19”) 181.320.
UL 174-1989, as amended through June 23, 1994—Household Electric Storage Tank Heaters (“UL 174”) 182.320.
UL 217-1993—Single and Multiple Station Smoke Detectors (“UL 217”) 181.450.
UL 486A-1992—Wire Connectors and Soldering Lugs For Use With Copper Conductors (“UL 486A”) 183.340.
UL 489-1995—Molded-Case Circuit Breakers and Circuit Breaker Enclosures (“UL 489”) 183.380.
UL 595-1991—Marine Type Electric Lighting Fixtures (“UL 595”) 183.410.
UL 710-1990, as amended through September 16, 1993—Exhaust Hoods For Commercial Cooking Equipment (“UL 710”) 181.425.
UL 1058-1989, as amended through April 19, 1994—Halogenated Agent Extinguishing System Units (“UL 1058”) 181.410.
UL 1102-1992—Non integral Marine Fuel Tanks (“UL 1102”) 182.440.
UL 1110-1988, as amended through May 16, 1994—Marine Combustible Gas Indicators (“UL 1110”) 182.480.
UL 1111-1988—Marine Carburetor Flame Arresters (“UL 1111”) 182.415.
UL 1113, Electrically Operated Pumps for Nonflammable Liquids, Marine, Third Edition (Sep. 4, 1997) (“UL 1113”) 182.520.
UL 1453-1988, as amended through June 7, 1994—Electric Booster and Commercial Storage Tank Water Heaters (“UL 1453”) 182.320.
UL 1570-1995—Fluorescent Lighting Fixtures (“UL 1570”) 183.410.
UL 1571-1995—Incandescent Lighting Fixtures (“UL 1571”) 183.410.
UL 1572-1995—High Intensity Discharge Lighting Fixtures (“UL 1572”) 183.410.
UL 1573-1995—Stage and Studio Lighting Units (“UL 1573”) 183.410.
UL 1574-1995—Track Lighting Systems (“UL 1574”) 183.410.
Code of Federal Regulations 185
[USCG-2003-16630, 73 FR 65203, Oct. 31, 2008, as amended at USCG-2009-0702, 74 FR 49240, Sept. 25, 2009]