162.050-19—Oil content meter and bilge alarm test rig.
(a)
This section contains requirements for test rigs used in approval testing of oil content meters and meter. A typical test rig is described in Figure 162.050-19. The mixture pipe shown in Figure 162.050-19 is the portion of test rig piping between the oil injection point and the meter or bilge alarm piping.
(b)
Each sample point on a test rig must be of the type described in Figure 162.050-17(e) and must be in a vertical portion of the test rig piping.
(c)
Each test rig must have a centrifugal pump that is designed to operate at 1,000 revolutions per minute or more.
Code of Federal Regulations
Code of Federal Regulations
308
[CGD 76-088a, 44 FR 53359, Sept. 13, 1979, as amended by USCG-2004-18939, 74 FR 3385, Jan. 16, 2009]