160.047-3—Materials.

(a) General. All components used in the construction of buoyant vests must meet the applicable requirements of subpart of this chapter. The requirements for materials specified in this section are minimum requirements, and consideration will be given to the use of alternate materials in lieu of those specified. Detailed technical data and samples of all proposed alternate materials must be submitted for approval before those materials are incorporated in the finished product.
(b) Kapok. The kapok shall be all new material complying with Subpart 164.003 of this subchapter and shall be properly processed.
(c) Fibrous glass. The fibrous glass shall comply with the requirements of specification MIL-B-2766.
(d) Envelope. The buoyant vest envelope, or cover, shall be made from 39″, 2.85 cotton jeans cloth, with a thread count of approximately 96×64. The finished goods shall weigh not less than 4.2 ounces per square yard, shall have a thread count of not less than 94×60, and shall have a breaking strength of not less than 85 pounds in the warp and 50 pounds in the filling. Other cotton fabrics having a weight and breaking strength not less than the above will be acceptable. There are no restrictions as to color, but the fastness of the color to laundering, water, crocking and light shall be rated “good” when tested in accordance with Federal Test Method Standard No. 191, Methods 5610, 5630, 5650, and 5660.
(e) Pad covering. The covering for the buoyant pad inserts shall be flexible vinyl film not less than 0.006″ in thickness meeting the requirements of Federal Specification L-P-375 for Type I or II, class 1, film.
(f) Tie tapes and body strap loops. The tie tapes and body strap loops for an adult or child size buoyant vest specified by this subpart must be 3/4 -inch cotton webbing meeting the requirements in military specification MIL-T-43566 (Class I) for Type I webbing.
(f-1) Body straps. The complete body strap assembly, including hardware, must have a breaking strength of 150 pounds for an adult size and 115 pounds for a child size. The specifications for the webbing are as follows:
(1) For an adult size vest, the webbing must be 1 inch.
(2) For a child size vest, the webbing must be three-fourth inch and meet the requirements of military specification MIL-W-530 for Type IIa webbing.
(f-2) Reinforcing tape. The reinforcing tape around the neck of a buoyant vest specified by this subpart must be 3/4 -inch cotton tape weighing 0.18 ounce or more per linear yard and having a minimum breaking strength of 120 pounds.
(g) [Reserved]
(h) Thread. Each thread must meet the requirements of subpart of this chapter. Only one kind of thread may be used in each seam.
[CGFR 65-37, 30 FR 11581, Sept. 10, 1965, as amended by CGD 72-90R, 37 FR 10836, May 31, 1972; CGD 73-130R 39 FR 20684, June 13, 1974; CGD 78-012; 43 FR 27154, June 22, 1978; CGD 82-063b, 48 FR 4782, Feb. 3, 1983; CGD 84-068, 58 FR 29493, May 20, 1993]