160.010-1—Incorporation by reference.

(a) Certain materials are incorporated by reference into this subpart with the approval of the Director of the Federal Register. The Office of the Federal Register publishes a table, “Material Approved for Incorporation by Reference,” which appears in the Finding Aids section of this volume. In that table is found the date of the edition approved, citations to the particular sections of this part where the material is incorporated, addresses where the material is available, and the date of the approval by the Director of the Federal Register. To enforce any edition other than the one listed in the table, notice of change must be published in the Federal Register and the material made available. All approved material is on file at the Office of the Federal Register, Washington, DC 20408, and at the U.S. Coast Guard, Lifesaving and Fire Safety Division (CG-5214), 2100 2nd St., SW., Stop 7126, Washington, DC 20593-7126.
(b) The materials approved for incorporation by reference in this subpart are:
National Bureau of Standards (NBS)
“The Universal Color Language” and “The Color Names Dictionary” in Color: Universal Language and Dictionary of Names,National Bureau of Standards Special Publication 440.
Military Specifications
MIL-P-19644 C—Plastic Molding Material (Polystyrene Foam, Expanded Bead).
MIL-R-21607 C—Resins, Polyester, Low Pressure Laminating, Fire Retardant.
MIL-P-21929 B—Plastic Material, Cellular Polyurethane, Foam-In-Place, Rigid (2 and 4 Pounds per Cubic Foot).
MIL-P-40619 A—Plastic Material, Cellular, Polystyrene (For Buoyancy Applications).
[CGD 79-167, 47 FR 41372, Sept. 20, 1982, as amended by CGD 95-072, 60 FR 50467, Sept. 29, 1995; CGD 96-041, 61 FR 50733, Sept. 27, 1996; USCG-2009-0702, 74 FR 49237, Sept. 25, 2009]