CFR > Title 46 - Shipping > CHAPTER I—COAST GUARD, DEPARTMENT OF HOMELAND SECURITY > SUBCHAPTER O—CERTAIN BULK DANGEROUS CARGOES (parts 150 to 155) > PART 154—SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES > SUBPART C—Design, Construction and Equipment (§154.170 to §154.1440) > 154.440—Allowable stress.

154.440—Allowable stress.

(a) The allowable stresses for an independent tank type A must:
(1) For tank web frames, stringers, or girders of carbon manganese steel or aluminum alloys, meet σB /2.66 or σY /1.33, whichever is less; and
(2) For other materials, be specially approved by the Commandant (CG-522).
(b) A greater allowable stress than required in paragraph (a)(1) of this section may be specially approved by the Commandant (CG-522) if the equivalent stress (σc) is calculated from the formula in Appendix A of this part.
(c) Tank plating must meet the American Bureau of Shipping's deep tank standards, for an internal pressure head that meets § 154.439(a), published in “Rules for Building and Classing Steel Vessels”, 1981.
[CGD 74-289, 44 FR 26009, May 3, 1979, as amended by CGD 82-063b, 48 FR 4782, Feb. 3, 1983; CGD 77-069, 52 FR 31630, Aug. 21, 1987]