98.86—Data reporting requirements.
In addition to the information required by § 98.3(c), each annual report must contain the information specified in paragraphs (a) and (b) of this section, as appropriate.
(a)
If a CEMS is used to measure CO2 emissions, then you must report under this subpart the relevant information required by § 98.36(e)(2)(vi) and the information listed in this paragraph(a):
(b)
If a CEMS is not used to measure CO2 emissions, then you must report the information listed in this paragraph (b) for each kiln:
(6)
Monthly fraction of total CaO, total MgO, non-calcined CaO and non-calcined MgO in clinker for each kiln (as wt-fractions).
(8)
Quarterly fraction of total CaO, total MgO, non-calcined CaO and non-calcined MgO in CKD not recycled to the kiln for each kiln (as wt-fractions).
(10)
Monthly kiln-specific clinker CO2 emission factors for each kiln (metric tons CO2 /metric ton clinker produced).
(11)
Quarterly kiln-specific CKD CO2 emission factors for each kiln (metric tons CO2 /metric ton CKD produced).
(12)
Annual organic carbon content of raw kiln feed or annual organic carbon content of each raw material (wt-fraction, dry basis).
(15)
Method used to determine the monthly clinker production from each kiln reported under (b)(2) of this section, including monthly kiln-specific clinker factors, if used.