98.66—Data reporting requirements.
In addition to the information required by § 98.3(c), you must report the following information at the facility level:
(1)
Perfluoromethane emissions and perfluoroethane emissions from anode effects in all prebake and all Sderberg electrolysis cells combined.
(2)
Anode effect minutes per cell-day (AE-mins/cell-day), anode effect frequency (AE/cell-day), anode effect duration (minutes). (Or anode effect overvoltage factor ((kg CF4 /metric ton Al)/(mV/cell day)), potline overvoltage (mV/cell day), current efficiency (%).)
(3)
Smelter-specific slope coefficients (or overvoltage emission factors) and the last date when the smelter-specific-slope coefficients (or overvoltage emission factors) were measured.
(g)
Smelter-specific inputs to the CO2 process equations (e.g., levels of sulfur and ash) that were used in the calculation, on an annual basis.
(h)
Exact data elements required will vary depending on smelter technology (e.g., point-feed prebake or Sderberg) and process control technology (e.g., Pechiney or other).