98.166—Data reporting requirements.
In addition to the information required by § 98.3(c), each annual report must contain the information specified in paragraphs (a) or (b) of this section, as appropriate, and paragraphs (c) and (d) of this section:
(a)
If a CEMS is used to measure CO2 emissions, then you must report the relevant information required under § 98.36 for the Tier 4 Calculation Methodology and the following information in this paragraph (a):
(2)
Annual quantity of hydrogen produced (metric tons) for each process unit and for all units combined.
(3)
Annual quantity of ammonia produced (metric tons), if applicable, for each process unit and for all units combined.
(b)
If a CEMS is not used to measure CO2 emissions, then you must report the following information for each hydrogen production process unit:
(2)
Monthly consumption of each fuel and feedstock used for hydrogen production and its type (scf of gaseous fuels and feedstocks, gallons of liquid fuels and feedstocks, kg of solid fuels and feedstocks).
(5)
Monthly analyses of carbon content for each fuel and feedstock used in hydrogen production (kg carbon/kg of gaseous and solid fuels and feedstocks, (kg carbon per gallon of liquid fuels and feedstocks).
(6)
Monthly analyses of the molecular weight of gaseous fuels and feedstocks (kg/kg-mole) used, if any.
(c)
Quantity of CO2 collected and transferred off site in either gas, liquid, or solid forms, following the requirements of subpart PP of this part.
(d)
Annual quantity of carbon other than CO2 collected and transferred off site in either gas, liquid, or solid forms (kg carbon).