92.5—Reference materials.
(a)
The documents in paragraph (b) of this section have been incorporated by reference. The incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be inspected at U.S. EPA, OAR, 401 M St., SW., Washington, DC 20460, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(b)
The following paragraphs and tables set forth the material that has been incorporated by reference in this part:
(1) ASTM material.
The following table sets forth material from the American Society for Testing and Materials that has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of the part, other than this section, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. More recent versions of these standards may be used with advance approval of the Administrator. Copies of these materials may be obtained from American Society for Testing and Materials, 1916 Race St., Philadelphia, PA 19103. The table follows:
| Document number and name | 40 CFR part 92 reference |
|---|---|
| ASTM D 86-95, Standard Test Method for Distillation of Petroleum Products | § 92.113 |
| ASTM D 93-94, Standard Test Methods for Flash-Point by Pensky-Martens Closed Cup Tester | § 92.113 |
| ASTM D 287-92, Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method) | § 92.113 |
| ASTM D 445-94, Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (the Calculation of Dynamic Viscosity) | § 92.113 |
| ASTM D 613-95, Standard Test Method for Cetane Number of Diesel Fuel Oil | § 92.113 |
| ASTM D 976-91, Standard Test Method for Calculated Cetane Index of Distillate Fuels | § 92.113 |
| ASTM D 1319-95, Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption | § 92.113 |
| ASTM D 1945-91, Standard Test Method for Analysis of Natural Gas by Gas Chromatography | § 92.113 |
| ASTM D 2622-94, Standard Test Method for Sulfur in Petroleum Products by X-Ray Spectrometry | § 92.113 |
| ASTM D 5186-91, Standard Test Method for Determination of Aromatic Content of Diesel Fuels by Supercritical Fluid Chromatography | § 92.113 |
| ASTM E 29-93a, Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications | §§ 92.9, 92.305, 92.509 |
(2) SAE material.
The following table sets forth material from the Society of Automotive Engineers that has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of the part, other than this section, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. Copies of these materials may be obtained from Society of Automotive Engineers International, 400 Commonwealth Dr., Warrendale, PA 15096-0001. The table follows:
| Document number and name | 40 CFR part 92 reference |
|---|---|
| SAE Paper 770141, Optimization of a Flame Ionization Detector for Determination of Hydrocarbon in Diluted Automotive Exhausts, by Glenn D. Reschke | § 92.119 |
| SAE Recommended Practice J244, Measurement of Intake Air or Exhaust Gas Flow of Diesel Engines | § 92.108 |
(3) ANSI material.
The following table sets forth material from the American National Standards Institute that has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of the part, other than this section, in which the matter is referenced. The second column is presented for information only and may not be all inclusive. More recent versions of these standards may be used with advance approval of the Administrator. Copies of these materials may be obtained from American National Standards Institute, 11 West 42nd St., 13th Floor, New York, NY 10036. The table follows:
| Document number and name | 40 CFR part 92 reference |
|---|---|
| ANSI B109.1-1992, Diaphragm Type Gas Displacment Meters | § 92.117 |