SUBPART B—Emission Regulations for 1977 and Later Model Year New Light-Duty Vehicles and New Light-Duty Trucks and New Otto-Cycle Complete Heavy-Duty Vehicles; Test Procedures (§86.101 to
- 86.101—General applicability.
- 86.102—Definitions.
- 86.103—Abbreviations.
- 86.104—Section numbering; construction.
- 86.105—Introduction; structure of subpart.
- 86.106-00—Equipment required; overview.
- 86.106-96—Equipment required; overview.
- 86.107-96—Sampling and analytical systems; evaporative emissions.
- 86.107-98—Sampling and analytical system.
- 86.108-00—Dynamometer.
- 86.108-79—Dynamometer.
- 86.109-94—Exhaust gas sampling system; Otto-cycle vehicles not requiring particulate emission measurements.
- 86.110-90—Exhaust gas sampling system; diesel vehicles.
- 86.110-94—Exhaust gas sampling system; diesel-cycle vehicles, and Otto-cycle vehicles requiring particulate emissions measurements.
- 86.111-90—Exhaust gas analytical system.
- 86.111-94—Exhaust gas analytical system.
- 86.112-91—Weighing chamber (or room) and microgram balance specifications.
- 86.113-04—Fuel specifications.
- 86.113-07—Fuel specifications.
- 86.113-94—Fuel specifications.
- 86.114-94—Analytical gases.
- 86.115-00—EPA dynamometer driving schedules.
- 86.115-78—EPA urban dynamometer driving schedule.
- 86.116-94—Calibrations, frequency and overview.
- 86.117-96—Evaporative emission enclosure calibrations.
- 86.118-00—Dynamometer calibrations.
- 86.118-78—Dynamometer calibration.
- 86.119-90—CVS calibration.
- 86.120-94—Gas meter or flow instrumentation calibration; particulate, methanol and formaldehyde measurement.
- 86.121-90—Hydrocarbon analyzer calibration.
- 86.122-78—Carbon monoxide analyzer calibration.
- 86.123-78—Oxides of nitrogen analyzer calibration.
- 86.124-78—Carbon dioxide analyzer calibration.
- 86.125-94—Methane analyzer calibration.
- 86.126-90—Calibration of other equipment.
- 86.127-00—Test procedures; overview.
- 86.127-12—Test procedures; overview.
- 86.127-96—Test procedures; overview.
- 86.128-00—Transmissions.
- 86.128-79—Transmissions.
- 86.129-00—Road load power, test weight, and inertia weight class determination.
- 86.129-80—Road load power, test weight, and inertia weight class determination.
- 86.129-94—Road load power, test weight, inertia weight class determination, and fuel temperature profile.
- 86.130-00—Test sequence; general requirements.
- 86.130-96—Test sequence; general requirements.
- 86.131-00—Vehicle preparation.
- 86.131-96—Vehicle preparation.
- 86.132-00—Vehicle preconditioning.
- 86.132-96—Vehicle preconditioning.
- 86.133-96—Diurnal emission test.
- 86.134-96—Running loss test.
- 86.135-12—Dynamometer procedure.
- 86.135-00—Dynamometer procedure.
- 86.135-90—Dynamometer procedure.
- 86.135-94—Dynamometer procedure.
- 86.136-90—Engine starting and restarting.
- 86.137-90—Dynamometer test run, gaseous and particulate emissions.
- 86.137-94—Dynamometer test run, gaseous and particulate emissions.
- 86.137-96—Dynamometer test run, gaseous and particulate emissions.
- 86.138-96—Hot soak test.
- 86.139-90—Particulate filter handling and weighing.
- 86.140-94—Exhaust sample analysis.
- 86.142-90—Records required.
- 86.143-96—Calculations; evaporative emissions.
- 86.144-94—Calculations; exhaust emissions.
- 86.145-82—Calculations; particulate emissions.
- 86.146-96—Fuel dispensing spitback procedure.
- 86.150-98—Refueling test procedure; overview.
- 86.151-98—General requirements; refueling test.
- 86.152-98—Vehicle preparation; refueling test.
- 86.153-98—Vehicle and canister preconditioning; refueling test.
- 86.154-98—Measurement procedure; refueling test.
- 86.155-98—Records required; refueling test.
- 86.156-98—Calculations; refueling test.
- 86.157-98—Refueling test procedures for liquefied petroleum gas-fueled vehicles.
- 86.158-00—Supplemental Federal Test Procedures; overview.
- 86.158-08—Supplemental Federal Test Procedures; overview.
- 86.159-00—Exhaust emission test procedures for US06 emissions.
- 86.159-08—Exhaust emission test procedures for US06 emissions.
- 86.160-00—Exhaust emission test procedure for SC03 emissions.
- 86.161-00—Air conditioning environmental test facility ambient requirements.
- 86.162-00—Approval of alternative air conditioning test simulations and descriptions of AC1 and AC2.
- 86.162-03—Approval of alternative air conditioning test simulations.
- 86.163-00—Spot check correlation procedures for vehicles tested using a simulation of the environmental test cell for air conditioning emission testing.
- 86.164-00—Supplemental Federal Test Procedure calculations.
- 86.164-08—Supplemental Federal Test Procedure calculations.
- 86.165-12—Air conditioning idle test procedure.
- 86.166-12—Method for calculating emissions due to air conditioning leakage.