CFR > Title 40 - Protection of Environment > CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY > SUBCHAPTER C—AIR PROGRAMS (Parts 50–99) > PART 86—CONTROL OF EMISSIONS FROM NEW AND IN-USE HIGHWAY VEHICLES AND ENGINES > SUBPART F—Emission Regulations for 1978 and Later New Motorcycles; Test Procedures (§86.501-78 to §86.544-90) > 86.508-78—Dynamometer.

86.508-78—Dynamometer.

(a) The dynamometer shall have a single roll with a diameter of at least 0.400 metre.
(b) The dynamometer shall be equipped with a roll revolution counter for measuring actual distance traveled.
(c) Flywheels or other means shall be used to stimulate the inertia specified in § 86.529.
(d) A variable speed cooling blower shall direct air to the vehicle. The blower outlet shall be at least 0.40 m 2 (4.31 ft 2) and shall be squarely positioned between 0.3 m (0.98 ft) and 0.45 m (1.48 ft) in front of the vehicle's front wheel. The velocity of the air at the blower outlet shall be within the following limits (as a function of roll speed):
Actual roll speed Allowable cooling air speed
0 km/h to 5 km/h 0 km/h to 10 km/h.
5 km/h to 10 km/h 0 km/h to roll speed 5 km/h.
10 km/h to 50 km/h Roll speed ±5 km/h.
50 km/h to 70 km/h Roll speed ±10 pct.
Above 70 km/h At least 63 km/h.
(e) The dynamometer shall comply with the tolerances in § 86.529.

Code of Federal Regulations

[42 FR 1137, Jan. 5, 1977, as amended at 42 FR 56738, Oct. 28, 1977]