761.19—References.
(b) Incorporation by reference.
The following material is incorporated by reference, and is available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html. These incorporations by reference were approved by the Director of the Office of the Federal Register. These materials are incorporated as they exist on the date of approval and a notice of any change in these materials will be published in the Federal Register. Copies of the incorporated material are available for inspection at the EPA Docket Center (EPA/DC), Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC 20460-0001. Copies of the incorporated material may be obtained from the American Society for Testing and Materials (ASTM), 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
References | CFR Citation |
---|---|
ASTM D 93 - 90 Standard Test Methods for Flash Point by Pensky-Martens Closed Tester | § 761.71(b)(2)(vi) ; § 761.75(b)(8)(iii) |
ASTM D 129-64 (Reapproved 1978) Standard Test Method for Sulfur in Petroleum Products (General Bomb Method) | § 761.71(b)(2)(vi) |
ASTM D 240-87 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuel by Bomb Calorimeter | § 761.71(b)(2)(vi) |
ASTM D 482-87 Standard Test Method for Ash from Petroleum Products | § 761.71(b)(2)(vi) |
ASTM D 524-88 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products | § 761.71(b)(2)(vi) |
ASTM D 808-87 Standard Test Method for Chlorine in New and Used Petroleum Products (Bomb Method) | § 761.71(b)(2)(vi) |
ASTM D 923-86 Standard Test Method for Sampling Electrical Insulating Liquids | § 761.60(g)(1)(ii) ; (g)(2)(ii) |
ASTM D 923-89 Standard Methods of Sampling Electrical Insulating Liquids | § 761.60(g)(1)(ii) ; (g)(2)(ii) |
ASTM D 1266-87 Standard Test Method for Sulfur in Petroleum Products (Lamp Method) | § 761.71(b)(2)(vi) |
ASTM D 1796-83 (Reapproved 1990) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure) | § 761.71(b)(2)(vi) |
ASTM D 2158-89 Standard Test Method for Residues in Liquified Petroleum (LP) Gases | § 761.71(b)(2)(vi) |
ASTM D 2709-88 Standard Test Method for Water and Sediment in Distillate Fuels by Centrifuge | § 761.71(b)(2)(vi) |
ASTM D 2784-89 Standard Test Method for Sulfur in Liquified Petroleum Gases (Oxy-hydrogen Burner or Lamp) | § 761.71(b)(2)(vi) |
ASTM D 3178-84 Standard Test Methods for Carbon and Hydrogen in the Analysis Sample of Coke and Coal | § 761.71(b)(2)(vi) |
ASTM D 3278-89 Standard Test Methods for Flash Point of Liquids by Setaflash Closed-Cup Apparatus | § 761.75(b)(8)(iii) |
ASTM E 258-67 (Reapproved 1987) Standard Test Method for Total Nitrogen Inorganic Material by Modified KJELDAHL Method | § 761.71(b)(2)(vi) |