710.39—How do I submit the required information?
(a) Use the proper EPA form.
You must use the EPA form identified as “Form U” to submit written information in response to the requirements of this subpart. Copies of the Form U are available from EPA at the address set forth in paragraph (c) of this section and from the EPA Internet Home Page at http://www.epa.gov/oppt/iur/iur02/index.htm.
(b) Follow the reporting instructions.
You should follow the detailed instructions for completing the reporting form and preparing a magnetic media report, which are given in the EPA publication entitled “Instructions for Reporting for Partial Updating of the TSCA Chemical Inventory Data Base,” via the Internet or the TSCA Hotline.
(c) Obtain the reporting package and copies of the form.
EPA is mailing the reporting package to those companies that reported in 1998. Failure to receive a reporting package does not obviate or otherwise affect the requirement to submit a timely report. If you did not receive a reporting package, but are required to report, you may obtain a copy of the reporting package and the reporting form from EPA by submitting a request for this information as follows:
(2) By e-mail.
Send an e-mail request for this information to the EPA TSCA Hotline at TSCA-Hotline@epamail.epa.gov.
(3) By mail.
Send a written request for this information to the following address: TSCA Hotline, Mail Code 7408M, ATTN: Inventory Update Rule, Office of Pollution Prevention and Toxics, U.S. Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.
(d) Submit the completed reports.
You must submit your completed reporting form(s) and/or magnetic media to EPA at the following address: OPPT Document Control Officer, Mail Code 7407M, ATTN: Inventory Update Rule, Office of Pollution Prevention and Toxics, U.S. Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460.