52.2820—Identification of plan.

(a) Purpose and scope. This section sets forth the applicable State implementation plan for American Samoa under section 110 of the Clean Air Act, 42 U.S.C. 7401-767 1q and 40 CFR part 51 to meet national ambient air quality standards.
(b) Incorporation by reference. (1) Material listed in paragraphs (c) and (d) of this section with an EPA approval date prior to June 1, 2005, was approved for incorporation by reference by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Material is incorporated as it exists on the date of the approval, and notice of any change in the material will be published in the Federal Register. Entries in paragraphs (c) and (d) of this section with EPA approval dates after June 1, 2005, will be incorporated by reference in the next update to the SIP compilation.
(2) EPA Region IX certifies that the rules/regulations provided by EPA in the SIP compilation at the addresses in paragraph (b)(3) of this section are an exact duplicate of the officially promulgated State rules/regulations which have been approved as part of the State implementation plan as of June 1, 2005.
(3) Copies of the materials incorporated by reference may be inspected at the Region IX EPA Office at 75 Hawthorne Street, San Francisco, CA 94105; the Air and Radiation Docket and Information Center, U.S. Environmental Protection Agency, 1301 Constitution Avenue, NW., Room B108, Washington, DC; or the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(c) EPA approved regulations.
Table 52.2820—EPA Approved Territory of American Samoa Regulations
State citation Title/subject Effective date EPA approval date Explanation
Air Pollution Control Rules and Regulations
Section 1.0 Definitions (1.0.1-1.0.18) 6/08/1972 3/02/1976, 41 FR 8956
Section 1.1 Approval of New Sources: Permit to Operate (1.1.1-1.1.14) 6/08/1972 3/02/1976, 41 FR 8956
Code of Federal Regulations 1194
Section 1.2 Source Monitoring, Record Keeping, and Reporting (1.2.1-1.2.2) 6/08/1972 3/02/1976, 41 FR 8956
Section 1.3 Sampling and Testing Methods (1.3.1-1.3.2) 6/08/1972 3/02/1976, 41 FR 8956
Section 1.4 Malfunction of Equipment; Reporting (1.4.1-1.4.2) 6/08/1972 3/02/1976, 41 FR 8956
Section 1.5 Prohibition of Air Pollution 6/08/1972 3/02/1976, 41 FR 8956
Section 1.6 Compliance Schedule (1.6.1, Existing Sources) 6/08/1972 3/02/1976, 41 FR 8956
Section 1.7 Circumvention 6/08/1972 3/02/1976, 41 FR 8956
Section 1.8 Severability 6/08/1972 3/02/1976, 41 FR 8956
Section 1.9 Ambient Air Quality Standards (1.9.1-1.9.2) 6/08/1972 3/02/1976, 41 FR 8956
Section 2.1 Control of Open BurningControl of Particulate Emissions 6/08/1972 3/02/1976, 41 FR 8956
Section 3.1 Visible Emissions (3.1.1-3.1.2) 6/08/1972 3/02/1976, 41 FR 8956
Section 3.2 Fugitive Dust (3.2.1-3.2.3) 6/08/1972 3/02/1976, 41 FR 8956
Section 3.3 Incineration (3.3.1-3.3.4) 6/08/1972 3/02/1976, 41 FR 8956
Section 3.4 Fuel Burning Equipment (3.4.1-3.4.2) 6/08/1972 3/02/1976, 41 FR 8956
Section 3.5 Process Industries—General (3.5.1, 3.5.3-3.5.5) 6/08/1972 3/02/1976, 41 FR 8956
Table 1 Particulate Emission Allowable Based on Process Weight 6/08/1972 3/02/1976, 41 FR 8956
Section 3.6 Sampling Methods (3.6.1)Control of Sulfur Compound Emissions 6/08/1972 3/02/1976, 41 FR 8956
Section 4.1 Fuel Combustion (4.1.1) 6/08/1972 3/02/1976, 41 FR 8956
(d) EPA approved State source specific requirements.
Name of source Permit No. Effective date EPA approval date Explanation
None
(e) [Reserved]

Code of Federal Regulations

[70 FR 53566, Sept. 9, 2005]