52.1870—Identification of plan.
(a)
Title of plan: “Implementation Plan for the Control of Suspended Particulates, Sulfur Dioxide, Carbon Monoxide, Hydrocarbons, Nitrogen Dioxide, and Photochemical Oxidants in the State of Ohio.”
(1)
Request for extensions and a revision of monitoring network was submitted on March 20, 1972, by the Ohio Air Pollution Control Board.
(2)
State provisions for making emissions data available to the public was outlined in a letter of May 8, 1972, by the Ohio Department of Health.
(3)
On May 9, 1972, the State provided assurance that action is being taken in the Assembly to secure authority for controlling auto emissions.
(4)
Amendments to air pollution regulations AP-3-11, 12, 13, 14, and AP-9-04 were forwarded on July 7, 1972, by the Governor.
(5)
Revisions to AP-2-01, 02, 04, 05; AP-3-01, 08, 09, 13; AP-9-01, 02, 03 were submitted on August 4, 1972 by the Governor.
(7)
Letter from the Director of the Ohio EPA was submitted on June 6, 1973, indicating that portions of AP-3-11, and AP-3-12 are for informational purposes only.
(8)
The Governor of Ohio submitted on July 2, 1973, the “Implementation Plan to Achieve Ambient Air Quality Standard for Photochemical Oxidant in the Cincinnati Air Quality Control Region” and the “Implementation Plan to Achieve Ambient Air Quality Standard for Photochemical Oxidant in the Toledo Air Quality Control Region.”
(9)
The Governor of Ohio submitted on July 24, 1973, the “Implementation Plan to Achieve Ambient Air Quality Standards for Photochemical Oxidants—Dayton Air Quality Control Region.”
(11)
On July 16, 1975, Ohio submitted regulations revising the attainment dates for particulate matter, nitrogen oxides, carbon monoxide, hydrocarbons and photochemical oxidants.
(12)
The Governor of Ohio submitted on May 30, 1974 and August 10, 1976, revisions to the Ohio Implementation for the control of open burning.
(13)
Consent and Abatement Order regarding Columbus and Southern Ohio Electric Company's Picway Units 3 and 4, submitted by Governor on October 17, 1975, supplemented on November 17, 1976 and June 1, 1977.
(14)
On July 27, 1979 the State submitted its nonattainment area plan for specific areas designated as nonattainment for ozone and carbon monoxide in the March 3, 1978 and October 5, 1978 Federal Registers ( 43 FR 8962 and 43 FR 45993 ). The submittal contained Ohio's Part D nonattainment plans for the following ozone and carbon monoxide urban nonattainment areas: Akron, Canton, Cincinnati, Cleveland, Columbus, Dayton, Steubenville and Toledo. The submittal contained transportation control plans and demonstrations of attainment (for carbon monoxide and/or ozone) for each of the above mentioned urban nonattainment areas. Regulations for the control of volatile organic compound emissions were not included with this submittal but were submitted separately on September 13, 1979.
(15)
On September 13, 1979, the State submitted regulations for the control of volatile organic compound and carbon monoxide emissions from stationary sources.
(16)
On December 28, 1979, the State amended the attainment demonstration submitted on July 27, 1979 for the Cleveland Urban area. On November 24, 1980 and July 21, 1981, the State submitted additional information on the transportation control plans for the Cleveland Urban area.
(17)
On January 8, 1980, the State amended the carbon monoxide attainment demonstration submitted on July 27, 1979 for the Steubenville urban area.
(18)
On January 15, 1980, the State amended the attainment demonstrations submitted on July 27, 1979 for the urban areas of Cincinnati, Toledo and Dayton.
(19)
On April 7, 1980 the State of Ohio committed to correct the deficiencies presented in the March 10, 1980 Notice of Proposed Rulemaking.
(20)
On April 15, 24, 28, May 27, July 23 and August 6, 1980 the State submitted comments on, technical support for, and commitments to correct the deficiencies cited in the March 10, 1980 Notice of Proposed Rulemaking. In addition to this the May 27, 1980 letter also contained a commitment by the State to adopt and submit to USEPA by each subsequent January, reasonable available control technology requirements for sources covered by the control techniques guidelines published by USEPA the preceding January.
(21)
On December 28, 1979 the State of Ohio submitted its Part D carbon monoxide and ozone nonattainment area plan for the Youngstown urban area. The submittal contained transportation control plans and demonstrations of attainment (for carbon monoxide and/or ozone). On February 12, 1980 the State amended the ozone attainment demonstration submitted on December 28, 1979.
(22)
On June 12, 1980 and August 6, 1980, the State submitted technical support and commitments to correct the deficiencies cited in the May 16, 1980 Notice of Proposed Rulemaking. On November 20, 1980 and July 21, 1981, the State submitted additional information on implementor commitments for the Youngstown Urban area.
(23)
On May 8, 1979, Ohio submitted revisions to regulations 3745-25-01 through 3745-25-04 (previously codified as AP-11-01 through AP-11-04) containing emergency episode procedures.
(24)
On July 25, 1980 the State of Ohio submitted its Part D revision to the New Source Review portion of the State Implementation Plan. On September 25, 1980 the State submitted a response to the August 26, 1980 Federal Register notice of proposed rulemaking. The response contained information which corrects certain deficiencies and commits to correct by a specified date other deficiencies.
(i)
On February 12, 1980 the Director of the Ohio EPA submitted the Ohio Administrative Code (OAC) Rules 3745-18-01 to 3745-18-94, Sulfur Dioxide Standards adopted on November 14, 1979 effective December 28, 1979.
(ii)
Ohio EPA sent technical support for the Ohio Sulfur Dioxide Standards on September 12, 1979, October 23, 1979, May 16, 1980, March 27, 1981, May 5, 1981, July 15, 1981 and September 24, 1981.
(iii)
The following regulations were withdrawn by the Governor of Ohio on May 16, 1980; OAC Rules 3745-18-08(H), 3745-18-15(B), 3745-18-53(E), 3745-18-63(K), 3745-18-77(B) and 3745-18-90(C). These rules are applicable to the following plants:
Cairo Chemical Corporation in Allen County, Crystal Tissue Company in Butler County, U.S. Steel Corporation, Lorain—Cuyahoga Works in Lorain County, Bergstrom Paper Company in Montgomery County, Mead Corporation in Ross County and Shell Chemical Company in Washington, County.
(iv)
The following regulations were withdrawn by the Governor of Ohio on December 19, 1980 only as it applies to the B.F. Goodrich Company, Avon Lake Chemical Plant in Lorain County; OAC 3745-18-53(A). These regulations are still applicable to other facilities in Lorain County.
(v)
The following regulations were withdrawn by the Governor of Ohio on February 13, 1981; OAC Rules 3745-18-49(J) which is applicable to the Ohio Rubber Company in Lake County and 3745-18-80(D) which is applicable to the Union Carbide Corporation in Seneca County.
(vi)
The Governor of Ohio submitted a revised OAC Rule 3745-18-80(D) which is applicable to the Union Carbide Corporation in Seneca County on April 30, 1981.
(26)
On February 8, 1980, the State of Ohio submitted a revision to provide for modification of the existing air quality surveillance network.
(27)
On February 18, and March 13, 1981, the Governor of Ohio submitted Rule 08 of Chapter 3745-17 of the Ohio Administrative Code for Middletown and the operating permits for the fugitive sources located at ARMCO's Middletown Works Plant.
(28)
On October 21 and November 21, 1980 the State submitted comments on, technical support for, and commitments to correct the deficiencies cited in the March 10, 1980 Notice of Proposed Rulemaking.
(29)
On September 17, 1980 the State of Ohio submitted a vehicle inspection and maintenance (I/M) program developed for the urbanized area of Cleveland and the Ohio portion of the Cincinnati metropolitan area. On December 5, 1980 the State submitted comments on, and commitments for correcting, the deficiencies cited in the November 7, 1980 Supplemental Notice of Proposed Rulemaking.
(30)
On February 18, 1981, the State of Ohio committed itself to submit by December 31, 1981, the corrective materials for the Middletown, Ohio total suspended particulate plan.
(31)
On March 27, 1981 and March 10, 1982 the State of Ohio submitted revisions to the total suspended particulate (TSP) portion of its State Implementation Plan (SIP). These revisions are in the form of an alternative emissions reduction plan (bubble) for the General Motors (GM) Central Foundry located in Defiance County, Ohio. Incorporated into Ohio's SIP are the emission limitations, interim and final compliance milestones, control equipment requirements and testing procedures specified in the variances and permits submitted for the GM bubble.
(32)
On July 27, 1979, the State of Ohio submitted materials to satisfy the general requirements of the Clean Air Act under sections 110(a)(2)(K); 126, 127, and 128. On January 30, 1981, the State of Ohio also submitted an amended substitute Senate Bill 258, which was enacted into law on December 19, 1980, amending Ohio Revised Code 3704.
(33)
Revision to plan allowing Standard Oil Company of Ohio Toledo refinery variances from State Regulations 3745-21-09(M) (1) and (2) submitted April 10, 1981 by the State.
(34)
Revision to plan allowing Standard Oil Company of Ohio Lima refinery variance from State Regulation 3745-21-09(M)(2) submitted April 10, 1981 by the State.
(35)
On August 27, 1981, the State of Ohio submitted a variance for the Pipeline Working Tank at the ARCO Pipeline Refinery in Summit County, Ohio.
(38)
The Governor of Ohio on June 15, 1981 submitted a revision to the ozone portion of the Ohio State Implementation Plan. This revision is for six coating lines located at the Speciality Materials Division of Fasson-Avery located in Lake County, Ohio.
(39)
On August 27, 1981, the State of Ohio submitted a variance for the Pipeline Working Tank at the ARCO Pipeline Refinery in Lucas County, Ohio.
(40)
On February 12, 1981, the State of Ohio submitted its Lead SIP Plan which contains a discussion of ambient monitoring results, an attainment demonstration and stationary and mobile source controls for lead.
(41)
On April 10, 1981, the Governor of Ohio submitted revised requirements for Republic Steel Corporation's Youngstown Sinter Plant.
(42)
On February 25, 1980, the State of Ohio submitted the revised Ohio Administrative Code (OAC) Rules 3745-35-01 through 3745-35-04 which set forth requirements for air permits to operate and variances. These rules were adopted on September 28, 1979 and became effective in Ohio on November 7, 1979.
(43)
On February 12, 1981, the State of Ohio submitted adopted amended Ohio Administrative Code (OAC) Rules 3745-21-01, 04, 09 and 10, Emission Standards and Technology Requirements for Certain Sources of Volatile Organic Compounds Emissions. The following portions of these rules were withdrawn by the State of Ohio on March 27, 1981; OAC Rules 3745-21-04(C)(19)(a) and 3745-21-09(R)(3)(a). On January 8, 1982, the State of Ohio submitted additional materials pertaining to OAC Rules 3745-21-09 (H), (U) and (X).
(44)
On April 16, 1981, the Ohio EPA submitted a variance which would extend for Presto Adhesive Paper Company in Montgomery County, Ohio the deadline for complying with applicable Ohio VOC emission limitations from April 1, 1982 to April 1, 1983 for water-based adhesive paper coatings and to April 1, 1984 for water-based silicone paper coatings.
(45)
On Feburary 25, 1980, the State submitted revisions to rules 01 through 06, 08 and 09 of Chapter 15 of the Ohio Administrative Code. These rules establish general provisions for the control of air pollution and were previously codified and approved as AP-2-01 through 06, 08 and 09. Rules 01 through 04, 06, 08 and 09 are approved as revisions to the Ohio SIP and rule 05 is deleted from the Ohio SIP.
(46)
On August 26, 1982, the Ohio Environmental Protection Agency submitted a variance which would establish an alternative emission control program (weighted averaging bubble) for eight vinyl coating lines at Uniroyal Plastic Products in Ottawa County, Ohio, and an alternative compliance schedule which will allow Uniroyal Plastic Products additional time to convert to waterborne coatings and inks. The final compliance date is October 1, 1987.
(47)
On June 29, 1982, the State submitted an amendment to the definition of air contaminant as contained in section 3704.01(B) of the Ohio Revised Code.
(48)
On August 31, 1982, Ohio Environmental Protection Agency submitted a variance which would establish an alternative emission control program (weighted averaging bubble) for five rotogravure printing lines at Packaging Corporation of America (PCA) in Wayne County, Ohio and an alternative compliance schedule which will allow PCA additional time to convert to waterborne coatings and inks. The final compliance date is July 1, 1987.
(49)
On September 10, 1982 the Ohio Environmental Protection Agency submitted a revision to its ozone SIP for the Mead Paper Corporation, Chilpaco Mill in Ross County, Ohio. This revision is in the form of three variances for the three flexographic printing lines at Mead Paper and contains revised emission limits and compliance schedules for each of the lines. Technical Support for this revision was also submitted on April 27, 1982.
(50)
On October 22, 1982, the Ohio Environmental Protection Agency submitted a revision to its Ozone SIP for the Standard Register Company. The revision request is in the form of a variance for an extended compliance time schedule for a surface coating line and spray boot for painting miscellaneous metal parts. Final compliance is changed from December 31, 1982 to December 31, 1983.
(51)
On October 1, 1982, and February 28, 1983 the State of Ohio submitted revisions to Ohio Administrative Code (OAC) Rules 3745-35-03 which set forth requirements for obtaining variances.
(56)
On January 5, 1983 the Ohio Environmental Protection Agency submitted a revision to its ozone SIP for the U.S. Steel Supply Division, Sharon Plant in Trumbull County, Ohio. Technical support for this revision was also submitted on November 12, 1982.
(57)
On January 4, 1982, amended December 23, 1982, the Ohio Environmental Protection Agency (OEPA) submitted a revision to its ozone SIP for the Chrysler Plastic Products Corporation, Sandusky Vinyl Product Division, in Erie County, Ohio. This revision amends the emission limitations and extends the compliance dates for five vinyl coating lines at this facility. Technical support for this revision was also submitted on June 28, 1982.
(58)
On July 14, 1982, the State submitted revisions to its State Implementation Plan for TSP and SO2 for Toledo Edison Company's Bay Shore Station in Lucas County, Ohio, except that the equivalent visible emission limitations in this submittal are no longer in effect.
(59)
On March 9, 1983, the Ohio Environmental Protection Agency submitted a variance which would establish an alternative emission control program (bubble) for eight vinyl coating lines at B.F. Goodrich in Washington County, Ohio, and an alternative compliance schedule which will allow B.F. Goodrich additional time to achieve final compliance through conversion to waterborne coatings and inks by December 31, 1985. If the company is unable to achieve compliance by December 1, 1985, through reformulation, the company must install add-on controls no later than December 1, 1987.
(60)
The State of Ohio submitted a revised demonstration that showed attainment by December 31, 1982, of the Carbon Monixide (CO) National Ambient Air Quality Standards (NAAQS) for the Cincinnati area (Hamilton County) on May 24, 1982. Supplemental information was submitted on September 23, 1982, November 4, 1982, and March 16, 1983. The May 24, 1982, submittal also requested that the five year extension for meeting the NAAQS requested on July 29, 1979, and granted on October 31, 1980, be rescinded for this area. EPA has rescinded this extension only for the Cincinnati demonstration area for CO.
(61)
On January 11, 1983, the Ohio EPA submitted justification and supportive documentation for the two categories of gasoline dispensing facilities and cutback asphalt. On March 2, 1983, Ohio EPA submitted demonstrations of reasonable further progress in the Canton and Youngstown areas. This information was submitted to satisfy the conditions on the approval of the 1979 ozone SIP.
(63)
On January 3, 1984, the Ohio Environmental Protection Agency submitted a revision to the Ohio Administrative Code 3745-15-07, Air Pollution Nuisance Prohibited.
(64)
On September 2, 1982, the State of Ohio submitted a revision to the total suspended particulate State Implementation Plan for the B.F. Goodrich Chemical Plant in Avon Lake, Lorain County, Ohio. This revision is being disapproved. (See § 52.1880(g) )
(66)
On March 16, 1984, the Ohio Environmental Protection Agency submitted commitments for satisfying the conditions of approval to the ozone [52.1885 (b)(2)] and particulate matter [52.1880 (d)(1)] State Implementation Plans.
(68)
On May 6, 1983, the Ohio Environmental Protection Agency (OEPA) submitted materials constituting a proposed revision to Ohio's ozone SIP for Harrison Radiator. Harrison Radiator has two metal coating facilities; one is the North facility located in downtown Dayton and the other is the South facility located in the City of Moraine.
(69)
On September 13, 1983, the Ohio Environmental Protection Agency submitted a variance which would establish an alternative emission control program (bubble) for Volatile Organic Compound emissions from a gasoline and aviation fuel loading rack located at Standard Oil Company in Trumbull County, Ohio.
(A)
An August 26, 1983, Permit and Variance to Operate an Air Contaminant Source Terms and Conditions, Application No. 02 78 06 0355 J001 and 02 78 06 0355 J002, for Niles Terminal Station N. 234, Niles Aviation Gasoline Bulk Terminal.
(70)
On April 8, 1982, June 22, 1982, November 8, 1982, May 24, 1985, and November 12, 1986, the Ohio Environmental Protection Agency submitted a revision to the sulfur dioxide SIP for the Ohio Power Muskingum River Power Plant located in Morgan and Washington Counties. USEPA approves an emission limit of 8.6 lbs/MMBTU to protect the primary NAAQS with a compliance date of June 17, 1980. In addition, USEPA approves an emission limit of 7.6 lbs/MMBTU to protect the secondary NAAQS with a compliance date of July 1, 1989.
(A)
Ohio Administrative Code (OAC) rule 3745-18-03(C)(3)(gg)(vi) effective in Ohio December 28, 1979; rule 3745-18-64(B) and rule 3745-18-90(B) effective in Ohio on October 1, 1982.
(B)
Director's Final Findings and Orders dated October 18, 1982, before the Ohio Environmental Protection Agency.
(C)
Director's Findings and Order dated November 18, 1986, before the Ohio Environmental Protection Agency.
(A)
Technical Support Document for emission limitations including dispersion modeling for the Muskingum River Plant submitted by the State on April 8, 1982.
(B)
Muskingum River Plant Supplementary Technical Support Document submitted by the State on June 22, 1982.
(71)
On July 1, 1980, the State of Ohio submitted a revision to its State Implementation Plan amending § 3704.11 of the Ohio Revised Code. This revision expands the authority given to a political subdivision in relation to certain open burning activities. Additional information for the revision was also submitted on September 30, 1980 and January 16, 1981.
(72)
On March 16, 1982, the State of Ohio submitted a revision to its State Implementation Plan for TSP for the Southerly Wastewater Treatment Plant in Columbus, Ohio.
(73)
On March 28, 1983, the State of Ohio Environmental Protection Agency (OEPA) submitted amendments to the Ohio Administrative Code (OAC) Chapter 3745-21 and supporting data to USEPA as a proposed revision to the ozone portion of its SIP. OAC Chapter 3745-21, entitled “Carbon Monoxide, Photochemically Reactive Materials, Hydrocarbons, and Related Material Standards”, contains Ohio's VOC RACT I and II regulations. The amendments to these regulations are embodied in the OAC as follows: Definitions, Rule 3745-21-01; Attainment dates and compliance time schedules, Rule 3745-21-04; Control of emissions of organic compounds from stationary sources, Rule 3745-21-09; and Compliance test methods and procedures, Rule 3745-21-10. See (c)(15). USEPA is not taking action on the applicability of Rule 3745-21-09 to new sources of VOC, to the gasoline throughout exemption level for gasoline dispensing facilities, and to the compliance date extension for Honda of America Manufacturing, Inc. auto and motorcycle assembly plant in Marysville. USEPA is not taking action on OAC Rule 3745-21-09(AA))(2)(a) which exempts any dry cleaning facility in which less than 60,000 pounds of fabrics are cleaned per year. USEPA is not taking action on OAC Rule 3745-21-09(U)(2)(f) (i) and (ii) which apply to new sources (surface coating lines). USEPA is identifying deficiencies in the existing Rule 3745-21-09(D)(3) which contains an alternative daily emission limitation for can coating facilities. USEPA identified the following deficiencies within this rule: This rule presents equations for determining an alternative daily emission limitation. USEPA finds that the equations are incorrect in that they are based on volume of coating used (in gallons, excluding water), which in many cases can lead to erroneous results. Equivalency calculations for coatings should be performed on a basis of volume of coating solids used rather than volume of coating used. ( 45 FR 80824 gives an example calculation for can coating done on a volume solids basis.)
(1) Rule 3745-21-01; Definitions.
(i) Section (D)(16), (36), and (50), paper and vinyl coating.
(ii) Section (F)(1-8), asphalts in road construction and maintenance.
(iii) Sections (E)(8), and (J)(5), corrections to Sections (E)(8) and (J)(5).
(2) Rule 3745-21-04; Attainment dates and compliance time schedules.
(i) Section (C)(3), can coating lines.
(ii) Section (C)(15), cutback and emulsified asphalts.
(iii) Section (C)(29), gasoline tank trucks.
(iv) Section (C)(33), External floating roof tanks.
(3) Rule 3745-21-09, Control of emission of organic compounds from stationary sources.
(i) Section (B), Emission limitations.
(ii) Sections, (C) (1) and (3), Surface coating of automobiles and light duty trucks.
(iii) Sections (I) (1) and (2), Surface coating of metal furniture.
(iv) Sections (K) (1) and (3) and (K)(4) (a), (b) and (c), Surface coating of large appliances.
(v) Sections (N) (1), (2), and (3) (b) and (c), Use of cutback and emulsified asphalts.
Code of Federal Regulations
(vi) Section (O)(2), Solvent metal cleaning.
(vii) Sections (P) (1), (4), and (5), Bulk gasoline plants.
(viii) Section (Q)(3), Bulk gasoline terminals.
(ix) Section (R)(3), Gasoline dispensing facilities.
(x) Sections (U)(1) and the exemptions contained in (2)(h), Surface coating miscellaneous metal parts and products.
(xi) Sections (X)(1) (a)(i), (b)(i), and the exemption contained in (2)(d), Rubber tire manufacturing.
(xii) Sections (Z)(1)(b) through (h), (2), and (3), Storage of petroleum liquid in external floating roof tanks. NOTE: USEPA is not approving (Z)(1)(a).
(xiii) Section (AA) (1) and (2) (b) and (c), Dry cleaning facility. NOTE: USEPA is not proposing to approve (AA)(2)(a).
(xiv) Sections (K)(4) (a), (b), and (c), for the Whirlpool Corporation plants located in Marion, Sandusky, and Hancock Counties.
(xv) Section (X)(2)(d), Cooper Tire and Rubber tire manufacturing facility located in Hancock County.
(4) Rule 3745-21-10; Compliance test methods and procedures.
(i) Sections (A) (3) and (4), General provisions.
(ii) Section (B) (3), (4) and (5), Methods for determining VOC content of surface coating and inks.
(iii) Section (E) (4) and (7), Method for determining VOC emissions from bulk gasoline terminals.
(iv) Section (K), Methods for detecting leaks of gasoline vapors.
(76)
On April 9, 1986, the State of Ohio submitted a negative declaration for natural gas/gasoline processing plants and manufacturers of high-density polyethylene and polypropylene resins.
(A)
Letter dated April 9, 1986, from Warren W. Tyler, Director, State of Ohio Environmental Protection Agency.
(77)
On November 20, 1985, the Ohio Environmental Protection Agency submitted a revision to the State Implementation Plan for Total Suspended Particulates. This revision request is for operating permits for the following two shiploading facilities: The Andersons Grain Division, Toledo Plant and Mid-States Terminals, Incorporated.
(A)
Permit to Operate an Air Contaminant Source for the Andersons Grain Division, Toledo Plant. Date of Issuance: November 18, 1985.
(B)
Permit to Operate an Air Contaminant Source for Mid-States Terminals, Incorporated. Date of Issuance: November 18, 1985.
(78)
On April 30, 1986, (draft) and on May 5, 1987, (final) the Ohio Environmental Protection Agency (OEPA) submitted a revision request to Ohio's sulfur dioxide SIP. The revision was in the form of Permits to Operate for the Coulton Chemical Plant in Toledo, Ohio, and the E.I. duPont de Nemours and Company facility in Miami, Ohio. The permits require the installation and operation of continuous emission monitors for sulfur dioxide at these facilities, and the reporting of monitoring data.
(A)
Special Term and Condition No. 3 of Permit to Operation No. 0448020014P001 for Coulton Chemical Corporation, effective January 3, 1986, Permit to Operate No. 0448020014P002 for Coulton Chemical Corporation, effective March 25, 1986.
(B)
Special Term and Condition No. 3 of Permit to Operate No. 1431350817P001 for E.I. duPont de Nemours and Company (Fort Hill Plant), effective March 2, 1984.
(A)
September 5, 1985, letter from Charles M. Taylor, Chief, Division of Air Pollution Control, Ohio Environmental Protection Agency; to Steve Rothblatt, Chief, Air and Radiation Branch, U.S. Environmental Protection Agency.
(79)
On April 9, 1986, the Ohio Environmental Protection Agency (OEPA) submitted a request for a revision to the Ozone State Implementation Plan (SIP) for the Huffy Corporation in Celina Ohio (Mercer County). This revision was in the form of a rule which is applicable to the Huffy Corporation in Mercer County.
(80)
On April 9, 1986, the Ohio Environmental Protection Agency submitted a revision to the State Implementation Plan for ozone. The revision consists of the reasonably available control technology (RACT) III volatile organic compound regulations.
(A)
Rule 3745-21-01, Definitions. Paragraphs (K), (L), (M), and (N), effective May 9, 1986. Ohio EPA OAC
(B)
Rule 3745-21-04, Attainment Dates and Compliance Time Schedules. Paragraphs (B)(1), and (C)(36) through (C)(39), effective May 9, 1986. Ohio EPA OAC
(C)
Rule 3745-21-09, Control of Emissions of Volatile Organic Compounds from Stationary Sources. Paragraphs (A)(1), (A)(2), (A)(4), (BB), (CC), (DD), (EE), and Appendix A, effective May 9, 1986. Ohio EPA OAC
(D)
Rule 3745-21-10, Compliance Test Method and Procedures. Paragraphs (C), (F), (L), (M), (N), (O), and (P), effective May 9, 1986.
(81)
On March 3, 1986, the Ohio Environmental Protection Agency (OEPA) submitted Good Engineering Stack Height Regulations as a revision to the Ohio State Implementation Plan (SIP).
(A)
Ohio Administrative Code Chapter 3745-16-01 and 02, entitled “Definitions” and “Good Engineering Practice Stack Height Regulations”. These rules were adopted by the State on February 12, 1986 and were effective on March 5, 1986.
(B)
September 2, 1987 letter from Richard L. Shank, Ph.D., Director, Ohio Environmental Protection Agency; to Valdas Adamkus, Regional Administrator, USEPA.
(A)
March 3, 1986, letter from Warren W. Tyler, Director, Ohio Environmental Protection Agency; to Valdas Adamkus, Regional Administrator, U.S. EPA.
(82)
On November 7, 1985, the Ohio Environmental Protection Agency submitted a revision to the ozone portion of the Ohio State Implementation Plan (SIP) for the Reynolds Metal Company in Pickaway County, Ohio. This variance shall expire on May 6, 1992.
(A)
State of Ohio Environmental Protection Agency Variance to Operate an Air Contaminant Source (except for Conditions No. 2, No. 3, and No. 6); Date of Issuance: October 29, 1985, Issued to: Reynolds Metal Company; Constitutes a Variance to Operate: miscellaneous metal parts coating line—Ransburg Disc spray booths No. 1 and No. 2; and signed by Warren W. Tyler, Director, Ohio Environmental Protection Agency.
(83)
On October 4, 1982, and January 24, 1983, the Ohio Environmental Protection Agency (OEPA) submitted revisions to the Ohio Administrative Code (OAC) Chapter 3745-31-01 through 3745-31-08 to satisfy the New Source Review conditional approval of October 31, 1980 ( 45 FR 72119 ). U.S. EPA is granting limited approval of the revision to Ohio's New Source Review State Implementation Plan (SIP) because the revised regulations strengthen the SIP.
(A)
OAC Rule 3745-31 through 3745-31-03—Permits to Install New Sources of Pollution (Adopted June 30, 1982, effective August 15, 1982), as found in the State of Ohio Environmental Protection Agency Laws and Regulations.
(A)
A June 30, 1987, letter from OEPA certified that the State did not rely upon additional reductions through the offset policy to attain or maintain the National Ambient Air Quality Standards.
(84)
On June 1, 1987, the Ohio Environmental Protection Agency (OEPA) submitted a revision request to Ohio's ozone SIP for the Goodyear Tire and Rubber Company in St. Marys (Auglaize County) Ohio. The revision was in the form of variances for adhesive application lines K001 to K019 and exempts them from the requirements contained in Ohio Administrative Code (OAC) Rule 3745-21-09(U). These variances expire on (3 years and 30 days from date of publication). The accommodative SIP for Auglaize County is removed for the period these variances are in effect.
(A)
Condition Number 8 (which references Special Terms and Conditions Numbers 1 through 5) within each of 19 “State of Ohio Environmental Protection Agency Variances to Operate An Air Contaminant Source”, Application Numbers 0306010138K001-0306010138K019, for Goodyear Tire and Rubber Company. The Date of Issuance is May 22, 1987.
(85)
On February 17, 1988, and January 4, 1989, the Ohio Environmental Protection Agency submitted a revision to the total suspended particulate SIP for Youngstown Thermal Corporation located in Youngstown, Ohio. This revision establishes a 0.02 lb/MMBTU emission limit for the one gas and Number 2 oil-fired boiler (B001) and a 0.14 lb/MMBTU limit for the three coal-fired boilers (B002, B003, and B004).
(A)
Ohio Administrative Code (OAC) Rule 3745-17-01, effective in Ohio on October 1, 1983; Rule 3745-17-03, effective in Ohio on October 15, 1983; and Rule 3745-17-10, effective in Ohio on October 1, 1983, as they apply to Youngstown Thermal Energy Corporation in Youngstown, Ohio only.
(87)
On July 11, 1988, Ohio submitted its vehicle inspection and maintenance regulation for Cuyahoga, Lake, Lorain, Hamilton, and Butler Counties.
(A)
Ohio Administrative Code rules 3745-26-01, 3745-26-02, 3745-26-03, 3745-26-04, 3745-26-05, 3745-26-06, 3745-26-07, 3745-26-08, and 3745-26-09, effective July 17, 1987.
(89)
On February 28, 1989, the Ohio Environmental Protection Agency (OEPA) submitted a revision request to Ohio's ozone SIP for the Navistar International Transportation Corporation in Springfield, Ohio. It modified this request on March 30, 1990. The revision is in the form of variances for miscellaneous metal parts and products coating lines and exempts them from the requirements contained in Ohio Administrative Code (OAC) Rule 3745-21-09(U). These variances expire on January 4, 1994.
(A)
Condition Number 8 (which references Special Terms and Conditions Number 1 through 11) within both of the “State of Ohio Environmental Protection Agency Variances to Operate An Air Contaminant Source”, Application Numbers 0812760220K009 and 0812760220K013 for Navistar International Transportation Corporation. The Date of Issuance is February 28, 1989.
(90)
On April 9, 1986, the Ohio Environmental Protection Agency (OEPA) submitted amendments to the Ohio Administrative Code (OAC) Chapter 3745-21. The amendments are embodied in the following OAC regulations: Definitions, Rule 3745-21-01; Attainment dates and compliance time schedules, Rule 3745-21-04; Control of emissions of volatile organic compounds from stationary sources, Rule 3745-21-09; and Compliance test methods and procedures, Rule 3745-21-10. USEPA is approving these amendments with the following exceptions: The proposed relaxation for food can end sealing compounds in 3745-21-09(D)(1)(e) and (D)(2)(e) (from 3.7 to 4.4 lbs VOC/gallon); the proposed revision to the exemption in 3745-21-09(N)(3)(e) for the application by hand of any cutback asphalt or emulsified asphalt for patching or crack sealing; the recordkeeping requirements in 3745-21-09(N)(4); the relaxation from 3.5 to 6.2 lbs VOC/gallon for high performance architectural aluminum coatings in 3745-21-09(U)(1)(a)(viii); the exemption for new sources in 3745-21-09(U)(2)(f); and the relaxation for miscellaneous metals coatings in 3745-21-09(U)(1)(a)(vii).
(1) 3745-21-09(D)(1)(e) and (D)(2)(e) (proposed relaxation for food can end sealing);
(2) 3745-21-09(N)(3)(e) (proposed revision to the exemption for the application by hand of any cutback or emulsified asphalt for patching crack sealing);
(3) 3745-21-09(N)(4) (recordkeeping requirements);
(4) 3745-21-09(U)(1)(a)(viii) (relaxation from 3.5 to 6.2 lbs VOC. gal for high performance architectural aluminum coatings);
(5) 3745-21-09(U)(2)(f) (the exemption for new sources); and
(6) 3745-21-09(U)(1)(a)(vii) (relaxation for miscellaneous metal coatings).
(91)
On September 30, 1983, the Ohio Environmental Protection Agency (OEPA) submitted a revision request to the ozone SIP for Ludlow Flexible Packaging, Inc. (Ludlow), located in Mt. Vernon (Knox County), Ohio. This revision was in the form of variances and permits that established a bubble with monthly averaging between 22 paper coating and printing lines (sources K001-K022) and a compliance date extension to June 30, 1987. On January 13, 1987, the OEPA submitted additional information concerning this revision stating that several of the printing lines have been or will be permanently shut down and the remaining lines will be controlled by thermal incineration in accordance with OAC Rule 3745-21-09(Y). In addition, four of the paper coating lines (K017-K019, K022) have been removed from the plant. Therefore, only eight paper coating lines (K011-K016, K020 and K021) remain under the bubble. This revision exempts these lines from the control requirements contained in Ohio Administrative Code (OAC) Rules 3745-21-09(F) and 3745-21-09(Y). These variances and permits expire on April 22, 1996.
The accommodative SIP for Knox County will be canceled upon approval of this SIP revision.
(A)
Condition Number 8 (which references Special Terms and Conditions Numbers 1-7 within each of the 5 “State of Ohio Environmental Protection Agency Variance to Operate an Air Contaminant Source,” Application Numbers 0342010111K011-0342010111K015, as they apply to Ludlow Flexible Packaging, Inc., located in Mt. Vernon, Ohio. The Date of Issuance is September 23, 1983.
(B)
Condition Number 8 (which references Special Terms and Conditions Numbers 1-7) within each of the 3 “State of Ohio Environmental Protection Agency Permit to Operate an Air Contaminant Source,” Application Numbers 0342010111K016, 0342010111K020, and 0342010111K021, as they apply to Ludlow Flexible Packaging, Inc., located in Mt. Vernon, Ohio. The Date of Issuance is September 23, 1983.