471.53—New source performance standards (NSPS).
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
(a) Rolling spent neat oils and graphite based lubricants—Subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(b) Rolling spent emulsions.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals rolled with emulsions |
| Copper |
0.549 |
0.262 |
| Nickel |
0.236 |
0.159 |
| Fluoride |
25.5 |
11.3 |
| Molybdenum |
2.16 |
0.957 |
| Oil and grease |
4.29 |
4.29 |
| TSS |
6.44 |
5.15 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(c) Drawing spent lubricants—Subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(d) Extrusion spent lubricants—Subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(e) Extrusion press hydraulic fluid leakage.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals extruded |
| Copper |
1.53 |
0.726 |
| Nickel |
0.655 |
0.441 |
| Fluoride |
70.8 |
31.4 |
| Molybdenum |
5.99 |
2.66 |
| Oil and grease |
11.9 |
11.9 |
| TSS |
17.9 |
14.3 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(f) Forging spent lubricants—Subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(g) Forging contact cooling water.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of forged refractory metals cooled with water |
| Copper |
0.041 |
0.020 |
| Nickel |
0.018 |
0.012 |
| Fluoride |
1.92 |
0.853 |
| Molybdenum |
0.163 |
0.072 |
| Oil and grease |
0.323 |
0.323 |
| TSS |
0.485 |
0.388 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(h) Equipment cleaning wastewater.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals formed |
| Copper |
0.174 |
0.083 |
| Nickel |
0.075 |
0.051 |
| Fluoride |
8.09 |
3.59 |
| Molybdenum |
0.684 |
0.303 |
| Oil and grease |
1.36 |
1.36 |
| TSS |
2.04 |
1.63 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(i) Metal powder production wastewater.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals powder produced |
| Copper |
0.360 |
0.172 |
| Nickel |
0.155 |
0.104 |
| Fluoride |
16.7 |
7.42 |
| Molybdenum |
1.42 |
0.627 |
| Oil and grease |
2.81 |
2.81 |
| TSS |
4.22 |
3.37 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(j) Metal powder production floor wash wastewater—Subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(k) Metal powder pressing spent lubricants—Subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(l) Surface treatment spent baths.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals surface treated |
| Copper |
0.498 |
0.237 |
| Nickel |
0.214 |
0.144 |
| Fluoride |
23.2 |
10.3 |
| Molybdenum |
1.96 |
0.868 |
| Oil and grease |
3.89 |
3.89 |
| TSS |
5.84 |
4.67 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(m) Surface treatment rinse.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals surface treated |
| Copper |
15.5 |
7.38 |
| Nickel |
6.66 |
4.48 |
| Fluoride |
720 |
320 |
| Molybdenum |
69.9 |
27.0 |
| Oil and grease |
121 |
121 |
| TSS |
182 |
145 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(n) Alkaline cleaning spent baths.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals alkaline cleaned |
| Copper |
0.428 |
0.204 |
| Nickel |
.184 |
0.124 |
| Fluoride |
19.9 |
8.82 |
| Molybdenum |
1.68 |
0.745 |
| Oil and grease |
3.34 |
3.34 |
| TSS |
5.01 |
4.01 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(o) Alkaline cleaning rinse.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals alkaline cleaned |
| Copper |
10.5 |
4.98 |
| Nickel |
4.49 |
3.02 |
| Fluoride |
486 |
216 |
| Molybdenum |
41.1 |
18.2 |
| Oil and grease |
81.6 |
81.6 |
| TSS |
123 |
97.9 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals treated with molten salt |
| Copper |
0.810 |
0.386 |
| Nickel |
0.348 |
0.234 |
| Fluoride |
37.7 |
16.7 |
| Molybdenum |
3.19 |
1.41 |
| Oil and grease |
6.33 |
6.33 |
| TSS |
9.5 |
7.6 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(q) Tumbling or burnishing wastewater.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals tumbled or burnished |
| Copper |
1.60 |
0.763 |
| Nickel |
0.688 |
0.463 |
| Fluoride |
74.4 |
33.0 |
| Molybdenum |
6.29 |
2.79 |
| Oil and grease |
12.5 |
12.5 |
| TSS |
18.8 |
15.0 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(r) Sawing or grinding spent neat oils—Subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(s) Sawing or grinding spent emulsions.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals sawed or ground with emulsions |
| Copper |
0.380 |
0.181 |
| Nickel |
0.164 |
0.110 |
| Fluoride |
17.7 |
7.84 |
| Molybdenum |
1.5 |
0.663 |
| Oil and grease |
2.97 |
2.97 |
| TSS |
4.46 |
3.57 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(t) Sawing or grinding contact cooling water.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals sawed or ground with contact cooling water |
| Copper |
3.11 |
1.48 |
| Nickel |
1.34 |
0.899 |
| Fluoride |
145 |
64.2 |
| Molybdenum |
12.2 |
5.42 |
| Oil and grease |
24.3 |
24.3 |
| TSS |
36.5 |
29.2 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(u) Sawing or grinding rinse.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of sawed or ground refractory metals rinsed |
| Copper |
0.018 |
0.009 |
| Nickel |
0.008 |
0.005 |
| Fluoride |
0.803 |
0.357 |
| Molybdenum |
0.068 |
0.030 |
| Oil and grease |
0.135 |
0.135 |
| TSS |
0.203 |
0.162 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(v) Wet air pollution control scrubber blowdown.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals sawed, ground, surface coated or surface treated |
| Copper |
1.01 |
0.480 |
| Nickel |
0.433 |
0.291 |
| Fluoride |
46.8 |
20.8 |
| Molybdenum |
3.96 |
1.76 |
| Oil and grease |
7.87 |
7.87 |
| TSS |
11.8 |
9.45 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(w) Miscellaneous wastewater sources.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals formed |
| Copper |
0.442 |
0.211 |
| Nickel |
0.190 |
0.128 |
| Fluoride |
20.6 |
9.11 |
| Molybdenum |
1.74 |
0.770 |
| Oil and grease |
3.45 |
3.45 |
| TSS |
5.18 |
4.14 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(x) Dye penetrant testing wastewater.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals product tested |
| Copper |
0.100 |
0.048 |
| Nickel |
0.043 |
0.029 |
| Fluoride |
4.62 |
2.05 |
| Molybdenum |
0.391 |
0.173 |
| Oil and grease |
0.776 |
0.776 |
| TSS |
1.17 |
0.931 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(y) Degreasing spent solvents—Subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
Code of Federal Regulations
[50 FR 34270, Aug. 23, 1985; 51 FR 2886, Jan. 22, 1986]
Any new source subject to this subpart must achieve the following new source performance standards (NSPS):
(a) Rolling spent neat oils and graphite based lubricants—subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(b) Rolling spent emulsions.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals rolled with emulsions |
| Copper |
0.549 |
0.262 |
| Nickel |
0.236 |
0.159 |
| Fluoride |
25.5 |
11.3 |
| Molybdenum |
2.16 |
0.957 |
| Oil and grease |
4.29 |
4.29 |
| TSS |
6.44 |
5.15 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(c) Drawing spent lubricants—subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(d) Extrusion spent lubricants—subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(e) Extrusion press hydraulic fluid leakage.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals extruded |
| Copper |
1.53 |
0.726 |
| Nickel |
0.655 |
0.441 |
| Fluoride |
70.8 |
31.4 |
| Molybdenum |
5.99 |
2.66 |
| Oil and grease |
11.9 |
11.9 |
| TSS |
17.9 |
14.3 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(f) Forging spent lubricants—subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(g) Forging contact cooling water.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of forged refractory metals cooled with water |
| Copper |
0.041 |
0.020 |
| Nickel |
0.018 |
0.012 |
| Fluoride |
1.92 |
0.853 |
| Molybdenum |
0.163 |
0.072 |
| Oil and grease |
0.323 |
0.323 |
| TSS |
0.485 |
0.388 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(h) Equipment cleaning wastewater.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals formed |
| Copper |
0.174 |
0.083 |
| Nickel |
0.075 |
0.051 |
| Fluoride |
8.09 |
3.59 |
| Molybdenum |
0.684 |
0.303 |
| Oil and grease |
1.36 |
1.36 |
| TSS |
2.04 |
1.63 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(i) Metal powder production wastewater.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals powder produced |
| Copper |
0.360 |
0.172 |
| Nickel |
0.155 |
0.104 |
| Fluoride |
16.7 |
7.42 |
| Molybdenum |
1.42 |
0.627 |
| Oil and grease |
2.81 |
2.81 |
| TSS |
4.22 |
3.37 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(j) Metal powder production floor wash wastewater—subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(k) Metal powder pressing spent lubricants—subpart E—NSPS.
There shall be no discharge of process wastewater pollutants.
(l) Surface treatment spent baths.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals surface treated |
| Copper |
0.498 |
0.237 |
| Nickel |
0.214 |
0.144 |
| Fluoride |
23.2 |
10.3 |
| Molybdenum |
1.96 |
0.868 |
| Oil and grease |
3.89 |
3.89 |
| TSS |
5.84 |
4.67 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(m) Surface treatment rinse.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals surface treated |
| Copper |
15.5 |
7.38 |
| Nickel |
6.66 |
4.48 |
| Fluoride |
720 |
320 |
| Molybdenum |
69.9 |
27.0 |
| Oil and grease |
121 |
121 |
| TSS |
182 |
145 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(n) Alkaline cleaning spent baths.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals alkaline cleaned |
| Copper |
0.428 |
0.204 |
| Nickel |
.184 |
0.124 |
| Fluoride |
19.9 |
8.82 |
| Molybdenum |
1.68 |
0.745 |
| Oil and grease |
3.34 |
3.34 |
| TSS |
5.01 |
4.01 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |
(o) Alkaline cleaning rinse.
Subpart E—NSPS
|
mg/off-kg (pounds per million off-pounds) of refractory metals alkaline cleaned |
| Copper |
10.5 |
4.98 |
| Nickel |
4.49 |
3.02 |
| Fluoride |
486 |
216 |
| Molybdenum |
41.1 |
18.2 |
| Oil and grease |
81.6 |
81.6 |
| TSS |
123 |
97.9 |
| pH |
(1) |
(1) |
|
1 Within the range of 7.5 to 10.0 at all times. |