CFR > Title 40 - Protection of Environment > CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY > SUBCHAPTER N—EFFLUENT GUIDELINES AND STANDARDS (Parts 400–471) > PART 467—ALUMINUM FORMING POINT SOURCE CATEGORY > SUBPART F—Drawing With Emulsions or Soaps Subcategory (§467.60 to §467.67) > 467.65—Pretreatment standards for existing sources.

467.65—Pretreatment standards for existing sources.

Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the values set forth below:
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
Chromium 0.205 0.084
Cyanide 0.135 0.056
Zinc 0.681 0.285
TTO 0.32
Oil and grease (alternate monitoring parameter) 25 12
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum rod cast
Chromium 0.0009 0.0004
Cyanide 0.0006 0.0003
Zinc 0.0029 0.0012
TTO 0.0014
Oil and grease (alternate monitoring parameter) 0.10 0.052
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum rod cast
Chromium 0.086 0.035
Cyanide 0.056 0.024
Zinc 0.283 0.119
TTO 0.134
Oil and grease (alternate monitoring parameter 10 5.1
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthy average
mg/off-kg (lb/million off-lbs) of aluminum quenched
Chromium 0.896 0.367
Cyanide 0.591 0.245
Zinc 2.98 1.25
TTO 1.41
Oil and grease (alternate monitoring parameter) 110 53
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthy average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.079 0.032
Cyanide 0.052 0.022
Zinc 0.262 0.11
TTO 0.124
Oil and grease (alternate monitoring parameter) 9.3 4.7
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthy average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.612 0.251
Cyanide 0.404 0.167
Zinc 2.03 0.849
TTO 0.96
Oil and grease (alternate monitoring parameter) 73 36
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthy average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.851 0.348
Cyanide 0.561 0.232
Zinc 2.82 1.18
TTO 1.33
Oil and grease (alternate monitoring parameter) 100 50

Code of Federal Regulations

[48 FR 49149, Oct. 24, 1983; 49 FR 11632 and 11636, Mar. 27, 1984, as amended at 53 FR 52369-52372, Dec. 27, 1988]
Except as provided in 40 CFR 403.7 and 403.13, any existing source subject to this subpart which introduces pollutants into a publicly owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for existing sources. The mass of wastewater pollutants in aluminum forming process wastewater introduced into a POTW shall not exceed the values set forth below:
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum drawn with emulsions or soaps
Chromium 0.205 0.084
Cyanide 0.135 0.056
Zinc 0.681 0.285
TTO 0.32
Oil and grease (alternate monitoring parameter) 25 12
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum rod cast
Chromium 0.0009 0.0004
Cyanide 0.0006 0.0003
Zinc 0.0029 0.0012
TTO 0.0014
Oil and grease (alternate monitoring parameter) 0.10 0.052
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthly average
mg/off-kg (lb/million off-lbs) of aluminum rod cast
Chromium 0.086 0.035
Cyanide 0.056 0.024
Zinc 0.283 0.119
TTO 0.134
Oil and grease (alternate monitoring parameter 10 5.1
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthy average
mg/off-kg (lb/million off-lbs) of aluminum quenched
Chromium 0.896 0.367
Cyanide 0.591 0.245
Zinc 2.98 1.25
TTO 1.41
Oil and grease (alternate monitoring parameter) 110 53
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthy average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.079 0.032
Cyanide 0.052 0.022
Zinc 0.262 0.11
TTO 0.124
Oil and grease (alternate monitoring parameter) 9.3 4.7
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthy average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.612 0.251
Cyanide 0.404 0.167
Zinc 2.03 0.849
TTO 0.96
Oil and grease (alternate monitoring parameter) 73 36
Pollutant or pollutant property PSES
Maximum for any 1 day Maximum for monthy average
mg/off-kg (lb/million off-lbs) of aluminum cleaned or etched
Chromium 0.851 0.348
Cyanide 0.561 0.232
Zinc 2.82 1.18
TTO 1.33
Oil and grease (alternate monitoring parameter) 100 50

Code of Federal Regulations

[48 FR 49149, Oct. 24, 1983; 49 FR 11632 and 11636, Mar. 27, 1984, as amended at 53 FR 52369-52372, Dec. 27, 1988]