466.25—Pretreatment standards for new sources.
Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicy owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources.
(b)
The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below:
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | ||
---|---|---|---|---|
Mg/m2 (pounds per million ft2) of area coated | ||||
Chromium | 0.47 | (0.10) | 0.19 | (0.04) |
Lead | 0.13 | (0.03) | 0.11 | (0.02) |
Nickel | 0.69 | (0.14) | 0.47 | (0.10) |
Zinc | 1.29 | (0.27) | 0.53 | (0.11) |
Code of Federal Regulations
Except as provided in 40 CFR 403.7, any new source subject to this subpart which introduces pollutants into a publicy owned treatment works must comply with 40 CFR part 403 and achieve the following pretreatment standards for new sources.
(b)
The discharge of process wastewater pollutants from all porcelain enameling coating operations shall not exceed the values set forth below:
Pollutant or pollutant property | Maximum for any 1 day | Maximum for monthly average | ||
---|---|---|---|---|
Mg/m2 (pounds per million ft2) of area coated | ||||
Chromium | 0.47 | (0.10) | 0.19 | (0.04) |
Lead | 0.13 | (0.03) | 0.11 | (0.02) |
Nickel | 0.69 | (0.14) | 0.47 | (0.10) |
Zinc | 1.29 | (0.27) | 0.53 | (0.11) |