445.11—Effluent limitations attainable by the application of the best practicable control technology currently available (BPT).
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations which represent the application of BPT:
Regulated parameter | Maximum daily 1 | Maximum monthly avg. 1 |
---|---|---|
BOD5 | 220 | 56 |
TSS | 88 | 27 |
Ammonia (as N) | 10 | 4.9 |
α-Terpineol | 0.042 | 0.019 |
Aniline | 0.024 | 0.015 |
Benzoic acid | 0.119 | 0.073 |
Naphthalene | 0.059 | 0.022 |
p-Cresol | 0.024 | 0.015 |
Phenol | 0.048 | 0.029 |
Pyridine | 0.072 | 0.025 |
Arsenic | 1.1 | 0.54 |
Chromium | 1.1 | 0.46 |
Zinc | 0.535 | 0.296 |
pH | (2) | (2) |
1 Milligrams per liter (mg/L, ppm). | ||
2 Within the range 6 to 9. |
Code of Federal Regulations
Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations which represent the application of BPT:
Regulated parameter | Maximum daily 1 | Maximum monthly avg. 1 |
---|---|---|
BOD5 | 220 | 56 |
TSS | 88 | 27 |
Ammonia (as N) | 10 | 4.9 |
α-Terpineol | 0.042 | 0.019 |
Aniline | 0.024 | 0.015 |
Benzoic acid | 0.119 | 0.073 |
Naphthalene | 0.059 | 0.022 |
p-Cresol | 0.024 | 0.015 |
Phenol | 0.048 | 0.029 |
Pyridine | 0.072 | 0.025 |
Arsenic | 1.1 | 0.54 |
Chromium | 1.1 | 0.46 |
Zinc | 0.535 | 0.296 |
pH | (2) | (2) |
1 Milligrams per liter (mg/L, ppm). | ||
2 Within the range 6 to 9. |