279.55—Analysis plan.
Owners or operators of used oil processing and re-refining facilities must develop and follow a written analysis plan describing the procedures that will be used to comply with the analysis requirements of § 279.53 and, if applicable, § 279.72. The owner or operator must keep the plan at the facility.
(1)
Whether sample analyses or knowledge of the halogen content of the used oil will be used to make this determination.
(i)
The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:
(ii)
The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and
(b) On-specification used oil fuel in
At a minimum, the plan must specify the following if § 279.72 is applicable:
(i)
The sampling method used to obtain representative samples to be analyzed. A representative sample may be obtained using either:
(iii)
The frequency of sampling to be performed, and whether the analysis will be performed on-site or off-site; and
(3)
The type of information that will be used to make the on-specification used oil fuel determination.