1051.701—General provisions.
(a)
You may average, bank, and trade emission credits for purposes of certification as described in this subpart to show compliance with the standards of this part. To do this you must certify your engines to Family Emission Limits (FELs) and show that your average emission levels for all your engine families together are below the emission standards in subpart B of this part, or that you have sufficient credits to offset a credit deficit for the model year (as calculated in § 1051.720 ).
(1)
You may not average together engine families that are certified to different standards. You may, however, use banked credits that were generated relative to different standards, except as prohibited by paragraphs (b)(2) and (3) of this section, paragraph (e) of this section, or by other provisions in this part. For example, you may not average together within a model year off-highway motorcycles that are certified to the standards in § 1051.105(a)(1) and § 1051.105(a)(2); but you may use banked credits generated by off-highway motorcycles that are certified to the standards in § 1051.105(a)(1) to show compliance with the standards in § 1051.105(a)(2) in a later model year, and vice versa.
(2)
There are separate averaging, banking, and trading programs for snowmobiles, ATVs, and off-highway motorcycles. You may not average or exchange banked or traded credits from engine families of one type of vehicle with those from engine families of another type of vehicle.
(3)
You may not average or exchange banked or traded credits with other engine families if you use fundamentally different measurement procedures for the different engine families (for example, ATVs certified to chassis-based vs. engine-based standards). This paragraph (b)(3) does not restrict you from averaging together engine families that use test procedures that we determine provide equivalent emission results.
(4)
You may not average or exchange banked or traded exhaust credits with evaporative credits, or vice versa.
(c)
The definitions of Subpart I of this part apply to this subpart. The following definitions also apply:
(1)
Actual emission credits means emission credits you have generated that we have verified by reviewing your final report.
(2)
Average standard means a standard that allows you comply by averaging all your vehicles under this part. See subpart B of this part to determine which standards are average standards.
(3)
Averaging set means a set of engines in which emission credits may be exchanged only with other engines in the same averaging set.
(4)
Broker means any entity that facilitates a trade of emission credits between a buyer and seller.
(6)
Reserved emission credits means emission credits you have generated that we have not yet verified by reviewing your final report.
(d)
In your application for certification, base your showing of compliance on projected production volumes for vehicles whose point of first retail sale is in the United States. As described in § 1051.730, compliance with the requirements of this subpart is determined at the end of the model year based on actual production volumes for vehicles whose point of first retail sale is in the United States. Do not include any of the following vehicles to calculate emission credits:
(4)
Vehicles for which the location of first retail sale is in a state that has applicable state emission regulations for that model year. However, this restriction does not apply if we determine that the state standards and requirements are equivalent to those of this part and that these vehicles sold in such a state will not generate credits under the state program. For example, you may not include vehicles certified for California if it has more stringent emission standards for these vehicles or those vehicles generate or use emission credits under the California program.
(5)
Any other vehicles, where we indicate elsewhere in this part 1051 that they are not to be included in the calculations of this subpart.
(e)
You may not use emission credits generated under this subpart to offset any emissions that exceed an FEL or standard, except as specified in § 1051.225(f)(1). This applies for all testing, including certification testing, in-use testing, selective enforcement audits, and other production-line testing.
(f)
Emission credits may be used in the model year they are generated or in future model years. Emission credits may not be used for past model years.
(g)
You may increase or decrease an FEL during the model year by amending your application for certification under § 1051.225.