CFR > Title 40 - Protection of Environment > CHAPTER I—ENVIRONMENTAL PROTECTION AGENCY > SUBCHAPTER U—AIR POLLUTION CONTROLS (Parts 1027–1074) > PART 1051—CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES > SUBPART B—Emission Standards and Related Requirements (§1051.101 to §1051.145) > 1051.137—What are the consumer labeling requirements?

1051.137—What are the consumer labeling requirements?

Label every vehicle certified under this part with a removable hang-tag showing its emission characteristics relative to other models. The label should be attached securely to the vehicle before it is offered for sale in such a manner that it would not be accidentally removed prior to sale. Use the applicable equations of this section to determine the normalized emission rate (NER) from the FEL for your vehicle. If the vehicle is certified without a family emission limit that is different than the otherwise applicable standard, use the final deteriorated emission level. Round the resulting normalized emission rate for your vehicle to one decimal place. If the calculated NER value is less than zero, consider NER to be zero for that vehicle. We may specify a standardized format for labels. At a minimum, the tag should include: the manufacturer's name, vehicle model name, engine description (500 cc two-stroke with DFI), the NER, and a brief explanation of the scale (for example, note that 0 is the cleanest and 10 is the least clean).
(a) For snowmobiles, use the following equation:
NER = 16.61 × log (2.667 × HC CO)−38.22
Where:
HC and CO are the cycle-weighted FELs (or emission rates) for hydrocarbons and carbon monoxide in g/kW-hr.
(b) For off-highway motorcycles, use the following equations:
(1) For off-highway motorcycles certified to the standards in § 1051.105, use one of the equations specified below.
(i) If the vehicle has HC NOX emissions less than or equal to 2.0 g/km, use the following equation:

Code of Federal Regulations

NER = 2.500 × (HC NOX)
Where:
HC NOX is the FEL (or the sum of the cycle-weighted emission rates) for hydrocarbons and oxides of nitrogen in g/km.
(ii) If the vehicle has HC NOX emissions greater than 2.0 g/km, use the following equation:

Code of Federal Regulations

NER = 5.000 × log(HC NOX) 3.495
Where:
HC NOX is the FEL (or the sum of the cycle-weighted emission rates) for hydrocarbons and oxides of nitrogen in g/km.
(2) For off-highway motorcycles certified to the standards in § 1051.615(b), use the following equation:

Code of Federal Regulations

NER = 8.782 × log(HC NOX) −5.598
Where:
HC NOX is the FEL (or the sum of the cycle-weighted emission rates) for hydrocarbons and oxides of nitrogen in g/kW-hr.
(c) For ATVs, use the following equations:
(1) For ATVs certified to the standards in § 1051.107, use one of the equations specified below.
(i) If the vehicle has HC NOX emissions less than or equal to 1.5 g/km, use the following equation:

Code of Federal Regulations

NER = 3.333 × (HC NOX)
Where:
HC NOX is the FEL (or the sum of the cycle-weighted emission rates) for hydrocarbons and oxides of nitrogen in g/km.
(ii) If the vehicle has HC NOX emissions greater than 1.5 g/km, use the following equation:

Code of Federal Regulations

NER = 4.444 × log(HC NOX) 4.217
Where:
HC NOX is the FEL (or the sum of the cycle-weighted emission rates) for hydrocarbons and oxides of nitrogen in g/km.
(2) For ATVs certified to the standards in § 1051.615(a), use the following equation:

Code of Federal Regulations

NER = 8.782 × log(HC NOX) −7.277
Where:
HC NOX is the FEL (or the sum of the cycle-weighted emission rates) for hydrocarbons and oxides of nitrogen in g/kW-hr.

Code of Federal Regulations

[70 FR 40491, July 13, 2005, as amended at 73 FR 59246, Oct. 8, 2008]