28.31—Quality control plans; contents.
(5)
Lot identification, control of processes, manufacturing, fabrication, and assembly work conducted in the applicant's plant;
(b)
The sampling plan shall include inspection tests and sampling procedures developed in accordance with Military Specification MIL-F-15160D, “Fuses; Instrument, Power, and Telephone” (which is hereby incorporated by reference and made a part hereof), Group A tests and Group B tests, except that the continuity and/or resistance characteristics of each fuse shall be tested. Military Specification MIL-F-15160D is available for examination at the U.S. Department of Labor, Mine Safety and Health Administration, Approval and Certification Center, 765 Technology Drive, Triadelphia, WV 26059. Copies of the document may be purchased from Information Dissemination (Superintendent of Documents), P.O. Box 371954, Pittsburgh, PA 15250-7954; Telephone: 866-512-1800, http://bookstore.gpo.gov.
(c)
The sampling procedure shall include a list of the characteristics to be tested by the applicant or his agent and shall include but not be limited to:
(d)
The quality control inspection test method to be used by the applicant or his agent for each characteristic required to be tested shall be described in detail.