18.97—Inspection of machines; minimum requirements.
(a)
Except as provided in § 18.95, all machines approved under the provisions of this subpart E shall, where practicable, meet the minimum design and performance requirements set forth in subpart B of this part 18 and, where necessary, the requirements of § 18.98.
(b)
The inspection of each machine shall be conducted by an electrical representative and such inspection shall include:
(2)
Examination of all components of the machine which have been approved or certified under Bureau of Mines Schedule 2D, 2E, 2F, or 2G to determine whether such components have been maintained in permissible conditions;
(3)
Comparison of the location of components on the machine with the drawings or photographs submitted to determine that each of them is properly located, identified and marked;
(4)
Pressure testing of explosion-proof compartments, when necessary, shall be conducted in accordance with § 18.98; and:
(iii)
If the performance of the explosion-proof enclosure is questionable, the qualified electrical representative may, at the request of the applicant, conduct a further detailed examination of the enclosure after disassembly and record his additional findings on MSHA Form No. 6-1481 under Results of Field Inspections.