1915.80—Scope, application, definitions, and effective dates.
Code of Federal Regulations
Effective Date Note:
At 76 FR 24698, May 2, 2011, subpart F was revised, effective Aug. 1, 2011. For the convenience of the user, the added and revised text is set forth as follows:
Subpart F—General Working Conditions
§ 1915.80
Scope, application, definitions, and effective dates.
(a)
The provisions of this subpart apply to general working conditions in shipyard employment, including work on vessels, on vessel sections, and at landside operations, regardless of geographic location.
(b)
Definitions applicable to this subpart.
(1)
Additional safety measure.
A component of the tags-plus system that provides an impediment (in addition to the energy-isolating device) to the release of energy or the energization or startup of the machinery, equipment, or system being serviced. Examples of additional safety measures include, but are not limited to, removing an isolating circuit element; blocking a controlling switch; blocking, blanking, or bleeding lines; removing a valve handle or wiring it in place; opening an extra disconnecting device.
(2)
Affected employee.
An employee who normally operates or uses the machinery, equipment, or system that is going to be serviced under lockout/tags-plus or who is working in the area where servicing is being performed under lockout/tags-plus. An affected employee becomes an authorized employee when the employer assigns the employee to service any machine, equipment, or system under a lockout/tags-plus application.
(3)
Authorized employee.
(i)
An employee who performs one or more of the following lockout/tags-plus responsibilities:
(A)
Executes the lockout/tags-plus procedures;
(B)
Installs a lock or tags-plus system on machinery, equipment, or systems; or
(C)
Services any machine, equipment, or system under lockout/tags-plus application.
(ii)
An affected employee becomes an authorized employee when the employer assigns the employee to service any machine, equipment, or system under a lockout/tags-plus application.
(4)
Capable of being locked out.
An energy-isolating device is capable of being locked out if it has a locking mechanism built into it, or it has a hasp or other means of attachment to which, or through which, a lock can be affixed. Other energy-isolating devices are capable of being locked out if lockout can be achieved without the need to dismantle, rebuild, or replace the energy-isolating device or permanently alter its energy-control capability.
(5)
Contract employer.
An employer, such as a painting, joinery, carpentry, or scaffolding subcontractor, that performs shipyard-related services or work under contract to the host employer or to another employer under contract to the host employer at the host employer's worksite. This excludes employers who provide services that are not directly related to shipyard employment, such as mail delivery, office supply, and food vending services.
(6)
Dummy load.
A device used in place of an antenna to aid in the testing of a radio transmitter that converts transmitted energy into heat to minimize energy radiating outward or reflecting back to its source during testing.
(7)
Energy-isolating device.
A mechanical device that, when utilized or activated, physically prevents the release or transmission of energy. Energy-isolating devices include, but are not limited to, manually operated electrical circuit breakers; disconnect switches; line valves; blocks; and any similar device used to block or isolate energy. Control-circuit devices (for example, push buttons, selector switches) are not considered energy-isolating devices.
(8)
Hazardous energy.
Any energy source, including mechanical (for example, power transmission apparatus, counterbalances,
Code of Federal Regulations
68
springs, pressure, gravity), pneumatic, hydraulic, electrical, chemical, and thermal (for example, high or low temperature) energies, that could cause injury to employees.
(9)
Hazardous substances.
A substance that may cause injury, illness, or disease, or otherwise harm an employee by reason of being explosive, flammable, poisonous, corrosive, oxidizing, irritating, or otherwise harmful.
(10)
Health care professional.
A physician or any other healthcare professional whose legally permitted scope of practice allows the provider to independently provide, or be delegated the responsibility to provide, some or all of the advice or consultation this subpart requires.
(11)
Host employer.
An employer that is in charge of coordinating shipyard-related work, or that hires other employers to perform shipyard-related work or to provide shipyard-related services, at a multi-employer worksite.
(12)
Isolated location.
An area in which employees are working alone or with little assistance from others due to the type, time, or location of their work. Such locations include remote locations or other work areas where employees are not in close proximity to others.
(13)
Lock.
A device that utilizes a positive means, either a key or combination lock, to hold an energy-isolating device in a “safe” position that prevents the release of energy and the startup or energization of the machinery, equipment, or system to be serviced.
(14)
Lockout.
The placement of a lock on an energy-isolating device in accordance with an established procedure, thereby ensuring that the energy-isolating device and the equipment being controlled cannot be operated until the lock is removed.
(15)
Lockout/tags-plus coordinator.
An employee whom the employer designates to coordinate and oversee all lockout and tags-plus applications on vessels or vessel sections and at landside work areas when employees are performing multiple servicing operations on the same machinery, equipment, or systems at the same time, and when employees are servicing multiple machinery, equipment, or systems on the same vessel or vessel section at the same time. The lockout/tags-plus coordinator also maintains the lockout/tags-plus log.
(16)
Lockout/tags-plus materials and hardware.
Locks, chains, wedges, blanks, key blocks, adapter pins, self-locking fasteners, or other hardware used for isolating, blocking, or securing machinery, equipment, or systems to prevent the release of energy or the startup or energization of machinery, equipment, or systems to be serviced.
(17)
Motor vehicle.
Any motor-driven vehicle operated by an employee that is used to transport employees, material, or property. For the purposes of this subpart, motor vehicles include passenger cars, light trucks, vans, motorcycles, all-terrain vehicles, small utility trucks, powered industrial trucks, and other similar vehicles. Motor vehicles do not include boats, or vehicles operated exclusively on a rail or rails.
(18)
Motor vehicle safety equipment.
Systems and devices integral to or installed on a motor vehicle for the purpose of effecting the safe operation of the vehicle, and consisting of such systems or devices as safety belts, airbags, headlights, tail lights, emergency/hazard lights, windshield wipers, defogging or defrosting devices, brakes, horns, mirrors, windshields and other windows, and locks.
(19)
Navy ship's force.
The crew of a vessel that is owned or operated by the U.S. Navy, other than a time- or voyage-chartered vessel, that is under the control of a Commanding Officer or Master.
(20)
Normal production operations.
The use of machinery or equipment, including, but not limited to, punch presses, bending presses, shears, lathes, keel press rollers, and automated burning machines, to perform a shipyard-employment production process.
(21)
Portable toilet.
A non-sewered portable facility for collecting and containing urine and feces. A portable toilet may be either flushable or non-flushable. For purposes of this section, portable toilets do not include privies.
(22)
Potable water.
Water that meets the standards for drinking purposes of the state or local authority having jurisdiction, or water that meets the quality standards prescribed by the U.S. Environmental Protection Agency's National Primary Water Regulations (40 CFR part 141
).
(23)
Readily accessible/available.
Capable of being reached quickly enough to ensure, for example, that emergency medical services and first aid intervention are appropriate or that employees can reach sanitation facilities in time to meet their health and personal needs.
(24)
Sanitation facilities.
Facilities, including supplies, maintained for employee personal and health needs such as potable drinking water, toilet facilities, hand-washing and -drying facilities, showers (including quick-drenching or flushing) and changing rooms, eating and drinking areas, first aid stations, and on-site medical-service areas. Sanitation supplies include soap, waterless cleaning agents, single-use drinking cups, drinking water containers, toilet paper, and towels.
(25)
Serviceable condition.
The state or ability of supplies or goods, or of a tool, machine, vehicle, or other device, to be used or to operate in the manner prescribed by the manufacturer.
(26)
Servicing.
Workplace activities that involve the construction, installation, adjustment, inspection, modification, testing, or
Code of Federal Regulations
69
repair of machinery, equipment, or systems. Servicing also includes maintaining machines, equipment, or systems when performing these activities would expose the employee to harm from the start-up or energization of the system being serviced, or the release of hazardous energy.
(27)
Sewered toilet.
A fixture maintained for the purpose of urination and defecation that is connected to a sanitary sewer, septic tank, holding tank (bilge), or on-site sewage-disposal treatment facility, and that is flushed with water.
(28)
Shield.
To install a covering, protective layer, or other effective measure on or around steam hoses or temporary steam-piping systems, including metal fittings and couplings, to protect employees from contacting hot surfaces or elements.
(29)
Short bight.
A loop created in a line or rope that is used to tie back or fasten objects such as hoses, wiring, and fittings.
(30)
Tag.
A prominent warning device that includes a means of attachment that can be securely fastened to an energy-isolating device in accordance with an established procedure to indicate that the energy-isolating device and the equipment being controlled must not be operated until the tag is removed by an authorized employee.
(31)
Tags-plus system.
A system to control hazardous energy that consists of an energy-isolating device with a tag affixed to it, and at least one additional safety measure.
(32)
Verification of isolation.
The means necessary to detect the presence of hazardous energy, which may involve the use of a test instrument (for example, a voltmeter), and, for other than electric shock protection, a visual inspection, or a deliberate attempt to start-up the machinery, equipment, or system.
(33)
Vermin.
Insects, birds, and other animals, such as rodents and feral cats, that may create safety and health hazards for employees.
(34)
Vessel section.
A subassembly, module, or other component of a vessel being built or repaired.
(35)
Walkway.
Any surface, whether vertical, slanted, or horizontal, on which employees walk, including areas that employees pass through, to perform their job tasks. Walkways include, but are not limited to, access ways, designated walkways, aisles, exits, gangways, ladders, ramps, stairs, steps, passageways, and scaffolding. If an area is, or could be, used to gain access to other locations, it is to be considered a walkway.
(36)
Work area.
A specific area, such as a machine shop, engineering space, or fabrication area, where one or more employees are performing job tasks.
(37)
Working surface.
Any surface where work is occurring, or areas where tools, materials, and equipment are being staged for performing work.
(38)
Worksite.
A general work location where one or more employees are performing work, such as a shipyard, pier, barge, vessel, or vessel section.
(c)
Effective dates.
This final rule becomes effective and enforceable on August 1, 2011, except for the provisions in § 1915.89
, which become effective and enforceable on October 31, 2011.