178.3010—Adjuvant substances used in the manufacture of foamed plastics.
The following substances may be safely used as adjuvants in the manufacture of foamed plastics intended for use in contact with food, subject to any prescribed limitations:
| List of substances | Limitations |
|---|---|
| Azodicarbonamide | For use as a blowing agent in pol-yethylene complying with item 2.1 in § 177.1520(c) of this chapter at a level not to exceed 5 percent by weight of finished foamed polyethylene. |
| 1,1-Difluoroethane (CAS Reg. No. 75-37-6) | For use as a blowing agent in polystyrene. |
| Isopentane | For use as a blowing agent in polystyrene. |
| n-Pentane | Do. |
| 1,1,2,2-Tetra-chloroethylene | For use only as a blowing agent adjuvant in polystyrene at a level not to exceed 0.3 percent by weight of finished foamed polystyrene intended for use in contact with food only of the types identified in § 176.170(c) of this chapter, table 1, under Categories I, II, VI, and VIII. |
| Toluene | For use only as a blowing agent adjuvant in polystyrene at a level not to exceed 0.35 percent by weight of finished foamed polystyrene. |