10.228—Additional requirements for preferential treatment of brassieres.
(1) Producer.
“Producer” means an individual, corporation, partnership, association, or other entity or group that exercises direct, daily operational control over the production process in a CBTPA beneficiary country.
(2) Entity controlling production.
“Entity controlling production” means an individual, corporation, partnership, association, or other entity or group that is not a producer and that controls the production process in a CBTPA beneficiary country through a contractual relationship or other indirect means.
(3) Fabrics formed in the United States.
“Fabrics formed in the United States” means fabrics that were produced by a weaving, knitting, needling, tufting, felting, entangling or other fabric-making process performed in the United States.
(i)
The price of the fabrics when last purchased, f.o.b. port of exportation, as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:
(A)
The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price; or
(B)
If no exportation to a CBTPA beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the freight, insurance, packing, and other costs incurred in transporting the fabrics to the place of production if included in that price; or
(ii)
If the price cannot be determined under paragraph (a)(4)(i) of this section or if CBP finds that price to be unreasonable, all reasonable expenses incurred in the growth, production, manufacture, or other processing of the fabrics, including the cost or value of materials (which includes the cost of non-recoverable scrap generated in forming the fabrics) and general expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabrics to the port of exportation.
(5) Declared customs value.
“Declared customs value” when used with reference to fabric contained in an article means the sum of:
(i)
The cost of fabrics formed in the United States that the producer or entity controlling production can verify; and
(ii)
The cost of all other fabric contained in the article, exclusive of all findings and trimmings, determined as follows:
(A)
In the case of fabric purchased by the producer or entity controlling production, the f.o.b. port of exportation price of the fabric as set out in the invoice or other commercial documents, or, if the price is other than f.o.b. port of exportation:
(1) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price, plus expenses for embroidering and dyeing, printing, and finishing operations applied to the fabric if not included in that price; or
(2) If no exportation to a CBTPA beneficiary country is involved, the price as set out in the invoice or other commercial documents, plus expenses for embroidering and dyeing, printing, and finishing operations applied to the fabric if not included in that price, but less the freight, insurance, packing, and other costs incurred in transporting the fabric to the place of production if included in that price;
(B)
In the case of fabric for which the cost cannot be determined under paragraph (a)(5)(ii)(A) of this section or if CBP finds that cost to be unreasonable, all reasonable expenses incurred in the growth, production, or manufacture of the fabric, including the cost or value of materials (which includes the cost of non-recoverable scrap generated in the growth, production, or manufacture of the fabric), general expenses and embroidering and dyeing, printing, and finishing expenses, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabric to the port of exportation;
(C)
In the case of fabric components purchased by the producer or entity controlling production, the f.o.b. port of exportation price of those fabric components as set out in the invoice or other commercial documents, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, or, if the price is other than f.o.b. port of exportation:
(1) The price as set out in the invoice or other commercial documents adjusted to arrive at an f.o.b. port of exportation price, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify; or
(2) If no exportation to a CBTPA beneficiary country is involved, the price as set out in the invoice or other commercial documents, less the cost or value of any non-textile materials, and less expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, and less the freight, insurance, packing, and other costs incurred in transporting the fabric components to the place of production if included in that price; and
(D)
In the case of fabric components for which a fabric cost cannot be determined under paragraph (a)(5)(ii)(C) of this section or if CBP finds that cost to be unreasonable: all reasonable expenses incurred in the growth, production, or manufacture of the fabric components, including the cost or value of materials (which does not include the cost of recoverable scrap generated in the growth, production, or manufacture of the fabric components) and general expenses, but excluding the cost or value of any non-textile materials, and excluding expenses for cutting or other processing to create the fabric components other than knitting to shape, that the producer or entity controlling production can verify, plus a reasonable amount for profit, and the freight, insurance, packing, and other costs, if any, incurred in transporting the fabric components to the port of exportation.
(6) Year.
“Year” means a 12-month period beginning on October 1 and ending on September 30 but does not include any 12-month period that began prior to October 1, 2000.
(7) Entered.
“Entered” means entered, or withdrawn from warehouse for consumption, in the customs territory of the United States.
(b) Limitations on preferential treatment—
(1) General.
During the year that begins on October 1, 2002, and during any subsequent year, articles of a producer or an entity controlling production that conform to the production standards set forth in § 10.223(a)(6) will be eligible for preferential treatment only if:
(i)
The aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of all of those articles of that producer or that entity controlling production that are entered as articles described in § 10.223(a)(6) during the immediately preceding year was at least 75 percent of the aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in all of those articles of that producer or that entity controlling production that are entered as articles described in § 10.223(a)(6) during that year; or
(ii)
In a case in which the 75 percent requirement set forth in paragraph (b)(1)(i) of this section was not met during a year and therefore those articles of that producer or that entity controlling production were not eligible for preferential treatment during the following year, the aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of all of those articles of that producer or that entity controlling production that conform to the production standards set forth in § 10.223(a)(6) and that were entered during the immediately preceding year was at least 85 percent of the aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in all of those articles of that producer or that entity controlling production that conform to the production standards set forth in § 10.223(a)(6) and that were entered during that year; and
(iii)
In conjunction with the filing of the claim for preferential treatment under § 10.225, the importer records on the entry summary or warehouse withdrawal for consumption (CBP Form 7501, column 34), or its electronic equivalent, the distinct and unique identifier assigned by CBP to the applicable documentation prescribed under paragraph (c) of this section.
(2) Rules of application—
(i) General.
For purposes of paragraphs (b)(1)(i) and (b)(1)(ii) of this section and for purposes of preparing and filing the documentation prescribed in paragraph (c) of this section, the following rules will apply:
(A)
The articles in question must have been produced in the manner specified in § 10.223(a)(6) and the articles in question must be entered within the same year;
(B)
Articles that are exported to countries other than the United States and are never entered are not to be considered in determining compliance with the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section;
(C)
Articles that are entered under an HTSUS subheading other than the HTSUS subheading which pertains to articles described in § 10.223(a)(6) are not to be considered in determining compliance with the 75 percent standard specified in paragraph (b)(1)(i) of this section;
(D)
For purposes of determining compliance with the 85 percent standard specified in paragraph (b)(1)(ii) of this section, all articles that conform to the production standards set forth in § 10.223(a)(6) must be considered, regardless of the HTSUS subheading under which they were entered;
(E)
Fabric components and fabrics that constitute findings or trimmings are not to be considered in determining compliance with the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section;
(F)
Beginning October 1, 2002, in order for articles to be eligible for preferential treatment in a given year, a producer of, or entity controlling production of, those articles must have met the 75 percent standard specified in paragraph (b)(1)(i) of this section during the immediately preceding year. If articles of a producer or entity controlling production fail to meet the 75 percent standard specified in paragraph (b)(1)(i) of this section during a year, articles of that producer or entity controlling production:
(1) Will not be eligible for preferential treatment during the following year;
(2) Will remain ineligible for preferential treatment until the year that follows a year in which articles of that producer or entity controlling production met the 85 percent standard specified in paragraph (b)(1)(ii) of this section; and
(3) After the 85 percent standard specified in paragraph (b)(1)(ii) of this section has been met, will again be subject to the 75 percent standard specified in paragraph (b)(1)(i) of this section during the following year for purposes of determining eligibility for preferential treatment in the next year.
(G)
A new producer or new entity controlling production, that is, a producer or entity controlling production which did not produce or control production of articles that were entered as articles described in § 10.223(a)(6) during the immediately preceding year, must first establish compliance with the 85 percent standard specified in paragraph (b)(1)(ii) of this section as a prerequisite to preparation of the declaration of compliance referred to in paragraph (c) of this section;
(H)
A declaration of compliance prepared by a producer or by an entity controlling production must cover all production of that producer or all production that the entity controls for the year in question;
(I)
A producer is not required to prepare a declaration of compliance if all of its production is covered by a declaration of compliance prepared by an entity controlling production;
(J)
In the case of a producer, the 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section and the declaration of compliance procedure under paragraph (c) of this section apply to all articles of that producer for the year in question, even if some but not all of that production is also covered by a declaration of compliance prepared by an entity controlling production;
(K)
The U.S. importer does not have to be the producer or the entity controlling production who prepared the declaration of compliance; and
(L)
The exclusion references regarding findings and trimmings in paragraph (b)(1)(i) and paragraph (b)(1)(ii) of this section apply to all findings and trimmings, whether or not they are of foreign origin.
(ii) Examples.
The following examples will illustrate application of the principles set forth in paragraph (b)(2)(i) of this section.
Code of Federal Regulations
Code of Federal Regulations
Code of Federal Regulations
Code of Federal Regulations
Code of Federal Regulations
Code of Federal Regulations
203
Code of Federal Regulations
Code of Federal Regulations
Code of Federal Regulations
(c) Documentation—
(1) Initial declaration of compliance.
In order for an importer to comply with the requirement set forth in paragraph (b)(1)(iii) of this section, the producer or the entity controlling production must have filed with CBP, in accordance with paragraph (c)(4) of this section, a declaration of compliance with the applicable 75 or 85 percent requirement prescribed in paragraph (b)(1)(i) or (b)(1)(ii) of this section. After filing of the declaration of compliance has been completed, CBP will advise the producer or the entity controlling production of the distinct and unique identifier assigned to that declaration. The producer or the entity controlling production will then be responsible for advising each appropriate U.S. importer of that distinct and unique identifier for purposes of recording that identifier on the entry summary or warehouse withdrawal. In order to provide sufficient time for advising the U.S. importer of that distinct and unique identifier prior to the arrival of the articles in the United States, the producer or the entity controlling production should file the declaration of compliance with CBP at least 10 calendar days prior to the date of the first shipment of the articles to the United States.
(2) Amended declaration of compliance.
If the information on the declaration of compliance referred to in paragraph (c)(1) of this section is based on an estimate because final year-end information was not available at that time and the final data differs from the estimate, or if the producer or the entity controlling production has reason to believe for any other reason that the declaration of compliance that was filed contained erroneous information, within 30 calendar days after the final year-end information becomes available or within 30 calendar days after the date of discovery of the error:
(i)
The producer or the entity controlling production must file with the CBP office identified in paragraph (c)(4) of this section an amended declaration of compliance containing that final year-end information or other corrected information; or
(ii)
If that final year-end information or other corrected information demonstrates noncompliance with the applicable 75 or 85 percent requirement, the producer or the entity controlling production must in writing advise both the CBP office identified in paragraph (c)(4) of this section and each appropriate U.S. importer of that fact.
(3) Form and preparation of declaration of compliance—
(i) Form.
The declaration of compliance referred to in paragraph (c)(1) of this section may be printed and reproduced locally and must be in the following format:
[19 CFR 10.223(a)(6) and 10.228 ] | |
1. Year beginning date: October 1, ___. | Official U.S. Customs and Border |
Year ending date: September 30, ___. | Protection Use Only |
Assigned number: _____ | |
Assignment date: _____ | |
2. Identity of preparer (producer or entity controlling production): | |
Full name and address: | Telephone number: _____ |
Facsimile number: _____ | |
Importer identification number: _____ | |
3. If the preparer is an entity controlling production, provide the following for each producer: | |
Full name and address: | Telephone number: _____ |
Facsimile number: _____ | |
4. Aggregate cost of fabrics (exclusive of all findings and trimmings) formed in the United States that were used in the production of brassieres that were entered during the year: _____ | |
5. Aggregate declared customs value of the fabric (exclusive of all findings and trimmings) contained in brassieres that were entered during the year: _____ | |
6. I declare that the aggregate cost of fabric (exclusive of all findings and trimmings) formed in the United States was at least 75 percent (or 85 percent, if applicable under 19 CFR 10.228(b)(1)(ii) ) of the aggregate declared customs value of the fabric contained in brassieres entered during the year. | |
7. Authorized signature: | 8. Name and title (print or type): |
_________ | |
Date: |
(ii) Preparation.
The following rules will apply for purposes of completing the declaration of compliance set forth in paragraph (c)(3)(i) of this section:
(A)
In block 1, fill in the year commencing October 1 and ending September 30 of the calendar year during which the applicable 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section was met;
(B)
Block 2 should state the legal name and address (including country) of the preparer and should also include the preparer's importer identification number (see § 24.5 of this chapter ), if the preparer has one;
(C)
Block 3 should state the legal name and address (including country) of the CBTPA beneficiary country producer if that producer is not already identified in block 2. If there is more than one producer, attach a list stating the legal name and address (including country) of all additional producers;
(D)
Blocks 4 and 5 apply only to articles that were entered during the year identified in block 1; and
(E)
In block 7, the signature must be that of an authorized officer, employee, agent or other person having knowledge of the relevant facts and the date must be the date on which the declaration of compliance was completed and signed.
(4) Filing of declaration of compliance.
The declaration of compliance referred to in paragraph (c)(1) of this section:
(i)
Must be completed either in the English language or in the language of the country in which the articles covered by the declaration were produced. If the declaration is completed in a language other than English, the producer or the entity controlling production must provide to CBP upon request a written English translation of the declaration; and
(ii)
Must be filed with the New York Strategic Trade Center, Customs and Border Protection, 1 Penn Plaza, New York, New York 10119.
(d) Verification of declaration of compliance—
(1) Verification procedure.
A declaration of compliance filed under this section will be subject to whatever verification CBP deems necessary. In the event that CBP for any reason is prevented from verifying the statements made on a declaration of compliance, CBP may deny any claim for preferential treatment made under § 10.225 that is based on that declaration. A verification of a declaration of compliance may involve, but need not be limited to, a review of:
(i)
All records required to be made, kept, and made available to CBP by the importer, the producer, the entity controlling production, or any other person under part 163 of this chapter ;
(ii)
Documentation and other information regarding all articles that meet the production standards specified in § 10.223(a)(6) that were exported to the United States and that were entered during the year in question, whether or not a claim for preferential treatment was made under § 10.225. Those records and other information include, but are not limited to, work orders and other production records, purchase orders, invoices, bills of lading and other shipping documents;
(iii)
Evidence to document the cost of fabrics formed in the United States that were used in the production of the articles in question, such as purchase orders, invoices, bills of lading and other shipping documents, and customs import and clearance documents, work orders and other production records, and inventory control records;
(iv)
Evidence to document the cost or value of all fabric other than fabrics formed in the United States that were used in the production of the articles in question, such as purchase orders, invoices, bills of lading and other shipping documents, and customs import and clearance documents, work orders and other production records, and inventory control records; and
(v)
Accounting books and documents to verify the records and information referred to in paragraphs (d)(1)(ii) through (d)(1)(iv) of this section. The verification of purchase orders, invoices and bills of lading will be accomplished through the review of a distinct audit trail. The audit trail documents must consist of a cash disbursement or purchase journal or equivalent records to establish the purchase of the fabric. The headings in each of these journals or other records must contain the date, vendor name, and amount paid for the fabric. The verification of production records and work orders will be accomplished through analysis of the inventory records of the producer or entity controlling production. The inventory records must reflect the production of the finished article which must be referenced to the original purchase order or lot number covering the fabric used in production. In the inventory production records, the inventory should show the opening balance of the inventory plus the purchases made during the accounting period and the inventory closing balance.
(2) Notice of determination.
If, based on a verification of a declaration of compliance filed under this section, CBP determines that the applicable 75 or 85 percent standard specified in paragraph (b)(1)(i) or paragraph (b)(1)(ii) of this section was not met, CBP will publish a notice of that determination in the Federal Register.