1130.7—Requirements for text of registration form.
(a) Purpose statement.
The front top portion of each form shall state: “PRODUCT REGISTRATION FOR SAFETY ALERT OR RECALL. We will use the information provided on this card to contact you only if there is a safety alert or recall for this product. We will not sell, rent, or share your personal information. To register your product, please complete and mail this card or visit our online registration at http://www.websitename.com.” Manufacturers that do not have a Web site may provide an email address and state at the end of the purpose statement: “To register your product, please complete and mail this card or email your contact information, the model name and number and date of manufacture of the product as provided on this card to: name@firmname.com ”.
(b) Manufacturer and product information.
The back of the top portion of the form shall state the manufacturer's name and contact information (a U.S. mailing address, a telephone number, toll free if available), Web site address, product model name and number (or other identifier as described in § 1130.4(a)(1) and (2) ), and manufacture date of the product.
(c) Consumer information.
The bottom front portion of the form shall have blocks for the consumer to provide his/her name, address, telephone number, and email address. These blocks shall be 5 mm wide and 7 mm high, with as many blocks as possible to fill the width of the card allowing for normal printing practices.
(d) Product information.
The following product information shall be provided on the back of the bottom portion of the form below the blocks for customer information printed directly on the form or on a pre-printed label that is applied to the form: The manufacturer's name, the model name and number (or other identifier as described in § 1130.4(a)(1) and (2) ), and the date of manufacture of the product. A rectangular box shall be placed around the model name, model number and manufacture date.