10.3—Development of a proposed standard.
(1)
Shall be based on adequate technical information, or, in the case of size standards (including standards covering the quantities for packaged consumer commodities), on adequate marketing information, or both, as determined to be appropriate by the Department;
(3)
Shall be technically appropriate and such that conformance or nonconformance with the standard can be determined either during or after the manufacturing process by inspection or other procedures which may be utilized by either an individual or a testing facility competent in the particular field;
(4)
Shall follow the format prescribed by the National Institute of Standards & Technology. (Copies of the recommended format may be obtained from the Office of Product Standards Policy, National Institute of Standards & Technology, Gaithersburg, Maryland 20899.);
(5)
Shall include performance requirements if such are deemed by the Department to be technically sound, feasible, and practical, and the inclusion of such is deemed to be appropriate;
(6)
May include dimensions, sizes, material specifications, product requirements, design stipulations, component requirements, test methods, testing equipment descriptions, and installation procedures. The appropriateness of the inclusion in a standard of any particular item listed in this subparagraph shall be determined by the Department; and
(7)
Shall be accompanied by rational statements pertaining to the requirements and test methods contained in the standard, if deemed necessary by the Department.
(b)
A proposed standard that is determined by the Department to meet the criteria set forth in paragraph (a) of this section may be subjected to further review by an appropriate individual, committee, organization, or agency (either government or nongovernment, but not associated with the proponent group).
(c)
A proposed standard may be circulated by the Department to appropriate producers, distributors, users, consumers, and other interested groups for consideration and comment as well as to others requesting the opportunity to comment.
(d)
The proponent group or appropriate committee which drafted the initial proposal under § 10.1(d) shall consider all comments and suggestions submitted by the reviewer designated under paragraph (b) of this section, and those received by the Department as a result of any circulation under paragraph (c) of this section, and may make such adjustments in the proposal as are technically sound and as are believed to cause the standard to be generally acceptable to producers, distributors, users, consumers, and other interested parties. The proposal will then be submitted to the Department for further processing.