SUBPART C—Structure (§23.301 to §23.575)
- 23.301—Loads.
- 23.302—Canard or tandem wing configurations.
- 23.303—Factor of safety.
- 23.305—Strength and deformation.
- 23.307—Proof of structure.
- 23.321—General.
- 23.331—Symmetrical flight conditions.
- 23.333—Flight envelope.
- 23.335—Design airspeeds.
- 23.337—Limit maneuvering load factors.
- 23.341—Gust loads factors.
- 23.343—Design fuel loads.
- 23.345—High lift devices.
- 23.347—Unsymmetrical flight conditions.
- 23.349—Rolling conditions.
- 23.351—Yawing conditions.
- 23.361—Engine torque.
- 23.363—Side load on engine mount.
- 23.365—Pressurized cabin loads.
- 23.367—Unsymmetrical loads due to engine failure.
- 23.369—Rear lift truss.
- 23.371—Gyroscopic and aerodynamic loads.
- 23.373—Speed control devices.
- 23.391—Control surface loads.
- 23.393—Loads parallel to hinge line.
- 23.395—Control system loads.
- 23.397—Limit control forces and -torques.
- 23.399—Dual control system.
- 23.405—Secondary control system.
- 23.407—Trim tab effects.
- 23.409—Tabs.
- 23.415—Ground gust conditions.
- 23.421—Balancing loads.
- 23.423—Maneuvering loads.
- 23.425—Gust loads.
- 23.427—Unsymmetrical loads.
- 23.441—Maneuvering loads.
- 23.443—Gust loads.
- 23.445—Outboard fins or winglets.
- 23.455—Ailerons.
- 23.459—Special devices.
- 23.471—General.
- 23.473—Ground load conditions and assumptions.
- 23.477—Landing gear arrangement.
- 23.479—Level landing conditions.
- 23.481—Tail down landing conditions.
- 23.483—One-wheel landing conditions.
- 23.485—Side load conditions.
- 23.493—Braked roll conditions.
- 23.497—Supplementary conditions for tail wheels.
- 23.499—Supplementary conditions for nose wheels.
- 23.505—Supplementary conditions for skiplanes.
- 23.507—Jacking loads.
- 23.509—Towing loads.
- 23.511—Ground load; unsymmetrical loads on multiple-wheel units.
- 23.521—Water load conditions.
- 23.523—Design weights and center of gravity positions.
- 23.525—Application of loads.
- 23.527—Hull and main float load factors.
- 23.529—Hull and main float landing conditions.
- 23.531—Hull and main float takeoff condition.
- 23.533—Hull and main float bottom pressures.
- 23.535—Auxiliary float loads.
- 23.537—Seawing loads.
- 23.561—General.
- 23.562—Emergency landing dynamic conditions.
- 23.571—Metallic pressurized cabin structures.
- 23.572—Metallic wing, empennage, and associated structures.
- 23.573—Damage tolerance and fatigue evaluation of structure.
- 23.574—Metallic damage tolerance and fatigue evaluation of commuter category airplanes.
- 23.575—Inspections and other procedures.