CFR > Title 10 - Energy > CHAPTER II—DEPARTMENT OF ENERGY > SUBCHAPTER H—ASSISTANCE REGULATIONS (parts 600 to 611) > PART 611—ADVANCED TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM > SUBPART B—Direct Loan Program (§611.100 to §611.112) > 611.103—Application evaluation.

611.103—Application evaluation.

(a) Eligibility screening. Applications will be reviewed to determine whether the applicant is eligible, the information required under § 611.101 is complete, and the proposed loan complies with applicable statutes and regulations. DOE can at any time reject an application, in whole or in part, that does not meet these requirements.
(b) Evaluation criteria. Applications that are determined to be eligible pursuant to paragraph (a) of this section shall be subject to a substantive review by DOE based upon factors that include, but are not limited to, the following:
(1) The technical merit of the proposed advanced technology vehicles or qualifying components, with greater weight given for factors including, but not limited to:
(i) Improved vehicle fuel economy above that required for an advanced technology vehicle;
(ii) Potential contributions to improved fuel economy of the U.S. light-duty vehicle fleet;
(iii) Likely reductions in petroleum use by the U.S. light-duty fleet; and
(iv) Promotion of use of advanced fuel (e.g., E85, ultra-low sulfur diesel).
(2) Technical Program Factors such as economic development and diversity in technology, company, risk, and geographic location.
(3) The adequacy of the proposed provisions to protect the Government, including sufficiency of Security, the priority of the lien position in the Security, and the percentage of the project to be financed with the loan.
(4) In making loans to those manufacturers that have existing facilities, priority will be given to those facilities that are oldest or have been in existence for at least 20 years even if such facilities are idle at the time of application.