431.75—Materials incorporated by reference.
(a)
We incorporate by reference the following test procedures into subpart D of Part 431. The Director of the Federal Register has approved the material listed in paragraph (b) of this section for incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR 51. Any subsequent amendment to this material by the standard-setting organization will not affect the DOE test procedures unless and until DOE amends its test procedures. We incorporate the material as it exists on the date of the approval and a notice of any change in the material will be published in the Federal Register.
(b) List of test procedures incorporated by reference.
(1)
American National Standards Institute (ANSI) Standard Z21.47-1998, “Gas-Fired Central Furnaces,” IBR approved for § 431.76.
(2)
Underwriters Laboratories (UL) Standard 727-1994, “Standard for Safety Oil-Fired Central Furnaces,” IBR approved for § 431.76.
(3)
Sections 8.2.2, 11.1.4, 11.1.5, and 11.1.6.2 of the Hydronics Institute (HI) Division of GAMA Boiler Testing Standard BTS-2000, “Method to Determine Efficiency of Commercial Space Heating Boilers,” published January 2001 (HI BTS-2000), IBR approved for § 431.76.
(4)
Sections 7.2.2.4, 7.8, 9.2, and 11.3.7 of the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE) Standard 103-1993, “ Method of Testing for Annual Fuel Utilization Efficiency of Residential Central Furnaces and Boilers,” IBR approved for § 431.76.
(c) Availability of references—
(1) Inspection of test procedures.
The test procedures incorporated by reference are available for inspection at:
(i)
National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call (202) 741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
(ii)
U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Hearings and Dockets, “Test Procedures and Efficiency Standards for Commercial Warm Air Furnaces; Efficiency Certification, Compliance, and Enforcement Requirements for Commercial Heating, Air Conditioning and Water Heating Equipment;” Docket No. EE-RM/TP-99-450, Forrestal Building, 1000 Independence Avenue, SW., Washington, DC 20585.
(2) Obtaining copies of Standards.
Anyone can purchase a copy of standards incorporated by reference from the following sources:
(i)
The ASHRAE Standard from the American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Inc., 1971 Tullie Circle, NE., Atlanta, GA 30329, or http://www.ashrae.org/book/bookshop.htm.
(ii)
The ANSI Standard from Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, or http://global.ihs.com/, or http://webstore.ansi.org/ansidocstore/.
(iii)
The UL Standard from Global Engineering Documents, 15 Inverness Way East, Englewood, CO 80112, or http://global.ihs.com/.
(iv)
The HI Standard from the Hydronics Institute Division of GAMA, P.O. Box 218, Berkeley Heights, NJ 07922, or http://www.gamanet.org/publist/hydroordr.htm.